Home Companies Guangdong ALI Testing Equipment Co,.Ltd

SGS 150L Lab Temperature Humidity Chamber SUS 304 Stainless Steel

Active Member

Contact Us

[China]

Address: Room 401, Building 3, No. 10, Longxi Road, Nancheng Street, Dongguan, Guangdong

Contact name:Kris

Guangdong ALI Testing Equipment Co,.Ltd

SGS 150L Lab Temperature Humidity Chamber SUS 304 Stainless Steel

Country/Region	china
City & Province	dongguan guangdong

Product Details

20%~98% RH 150L Lab Programmable Temperature Humidity Chamber -40℃~150℃ Air Cooling

Accelerated life testing chamber, rapid chamge temperature testing systems is widely applied for quality inspection for all types of electric products, electric appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries by constant high low temperature change, damp heat etc environment simulation reliability test.

Features:

1. High-texture appearance, the surface handled through the matte stripes, and use of planar non-reactive handles, easy to operate, safe and reliable.

2. Rectangular complex glass window can be viewed the testing sample, windows with anti-sweat heater device that prevents water vapor condensation, and high-brightness PL light.

3. Double-insulated airtight container, which can effectively isolate the internal temperature of leakage.

4. With an external water supply system can be easy to supply water and automatically reuse.

5. Compressor circulatory system from French "Taikang", more effective removal of oil between the condenser and the capillary and use environmentally refrigerants (R23, R404, R507).

6. Controller imported LCD display screen can be displayed measuring values and setting the value and time.

7. Controller with multi-segment program edited, temperature and humidity can be controlled quickly (OUICK) or slope (SLOP).

8. Built-in mobile pulley easy to move and has a strong positioning screw fixed position.

International Electrotechnical Commission Standard:

IEC68-2-03_test method Ca_Steady damp-heat

IEC68-2-01_test method A_cold

IEC68-2-02_test method B_dry heat

Military Standards:

MIL-STD-810F-507.4 humidity

MIL-STD-810F-501.4 high temperature

MIL-STD-810F-502.4 low temperature

MIL-STD883C test method 1004.2 temperature and humidity cycling test

MIL-STD810D test method 502.2

MIL-STD810 test method 507.2 procedure 3

Inside size WxHxD (cm)	40x50x40	50x60x50	50x75x60	60x85x80	80x95x80	100x100x80	100x100x100
Outside size WxHxD (cm)	90x136x94	100x146x104	100x161x117	110x171x137	130x181x137	150x186x137	150x186x157
Temperature range	-70℃~+100℃(150℃) (A:+25℃ B:0℃ C:-20℃ D:-40℃ E:-50℃ F:-60℃ G:-70℃)

Humidity range	20%~98%R.H. (10%-98%R.H/5%~98%R.H is the specific codition)
Accuracy/ uniformly	±0.1℃;±0.1%R.H./ ±1.0℃;±3.0%R.H.
Accuracy / volatility	±1.0℃;±2.0%R.H./ ±0.5℃;±2.0%R.H.
Heating / cooling time	About 4.0℃/min;about 1.0℃/min(5~10℃/mm is the specific condition)
Inside material	Stainless steel SUS 304#
Insulation material	High-temperature high-density amino acid ethyl ester foam insulation materials
Cooling system	Air-cooled/ single-stage compressor(-20℃) ,wind, water cooled/ two-stage compressor(-40℃~-70℃)
Protection	compressor overload switch, high and low pressure protection switch, over-humidity-temperature protection switches, fuses, warning system
Accessories	recorder(purchase),view window,50mm testing hole, PL lamp, clapboard, Dry and wet gauze ball
Controller	TEMI580, 880 digital controller from South Korea
Compressor	France “Tecumseh”
Power	1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz

Application :

Temperature adaptability test under the condition of rapid change, or gradient for electrical, electronic, instruments and other products or spare parts, particularly applies to environmental stress screening test (ESS)

Environmental stress screening (ESS) refers to the process of exposing a newly manufactured or repaired product or component (typically electronic) to stresses such as thermal cycling and vibration in order to force latent defects to manifest themselves by permanent or catastrophic failure during the screening process. The surviving population, upon completion of screening, can be assumed to have a higher reliability than a similar unscreened population.

ESS can be performed as part of the manufacturing process or it can be used in new product qualification testing.

ESS Testing Purpose

Testing at the physical environmental conditions (shock, vibration, temperature, altitude, humidity, etc.) that simulate those encountered over the operational life of the component. Random vibration and temperature cycling have proven to be the most successful forms of ESS in terms of effective flaw precipitation.

We keep good quality and competitive price to ensure our customers benefit ; We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from. Each batch of parts is done quality sampling inspection before into the warehouse, and Each product before delivery is tested by the national authoritative third-party inspection agency

More produced:

Temperature Humidity Test Chamber
Walk-in Aging Chamber
Environmental Test Chambers
Thermal Shock Chamber
Fast Temp. Change Test Chamber
Vibration Shaker
Environmental Vibration Chamber
Mechanical Shock Tester
UV Chamber
Xenon Chamber
highly accelerated stress testing
Salt Spray Test Chamber
Paper Packing Test Equipment

Customers Support Services

1. Installation;

2. Training (Training customer employees);

3. Calibration;

4. Preventative maintenance;

5. Replacement parts;

6. Assistance via phone or internet;

7. On-site diagnosis and repair/online diagnosis and repair;