Active Member
|
[China]
Address: 7th Floor, Comprehensive Building, Nankeng Second Industrial Zone, Bantian Street, Longgang District, Shenzhen City, Guangdong Province, China
Contact name:Lynn Lin
Shenzhen Kadymay Technology Co., Ltd. |
|
|
1.3 Device Interface Function Definition
| Interface No. | Interface Name | Functional Indicators |
| 1 | Power Interface | 12VDC |
| 2 | Network Interface | RJ45 Network Interface |
| 3 | Relay Interface | +:NO Normally Open Port -:COM Public Port |
| 4 | Audio Interface | 1: Audio Input 2: Audio Ground 3: Audio Output 4: Empty |
1. Camera being set in front of the aisle to capture the face;
2. Suggested installation height is about 2 meters, and camera overlook view angle 0~15°;
3. For accurate detection of body temperature,1 meters(Range 1m to 2.5m)distance are tested for the optimum capture distance.
1.Illumination Requirements: No backlight, no obviously reflect light on face, uniform light and no shadow. In addition, to ensure the enough illumination of the scene when capturing the face, it is suggested to increase the lighting devices if the face in the display is not bright enough which may effect the face capture(General 250~800Lux).
2.Light and Wind Requirements: This Device is suggested to be installed indoor, ensuring there is no wind between device and people, no direct sunlight, so as to avoid the detected temperature too low or too high caused by blowing ,cooling and direct sunlight.
