Active Member
|
[China]
Address: No. 88, Jiaolian Yiheng Road, Wanjiang district, DongGuan, China (523046)
Contact name:Andy DAI
DongGuan Q1-Test Equipment Co., Ltd. |
|
|
ASTM B117 Walk-in Salt Spray Test Chamber Support Customized Made
Technical Specifications:
| Model | ASR-KLD-440P-F |
| Volume | 4400L, other volumes can be customized |
| Internal Dimension | 2200×2000×1000mm (depth×width×height) other sizes can be customized |
| Overall Dimension | 2650×2550×1850mm (depth×width×height) |
| Power supply | AC380V±10%, 50Hz±1 |
| Total power | 12KW |
| Weight | about 980kg |
| Temperature range | R.T+10～55℃ Remarks: 1. All tests are conducted under empty box conditions, 2. Test conditions are room temperature ≤25℃, relative humidity ≤85%R.H, unloaded studio, tested in 1/10 space away from the inner wall of the box, and constant temperature for two hours. |
| Spray quantum | 1~2ml/h, 80c㎡ |
| Temperature fluctuation | ≤±0.5℃ |
| Temperature uniformity | ≤2℃ |
| Temperature deviation | ±2℃ |
| Heating time | ≤60min |
| Noise | <70dB |
| Testing standards | GB2423.17 GB/T10125-2012 ASTMB117-2011 |
| Salt spray test NSS, ACSS | Laboratory temperature: 35℃±1℃ Saturated air barrel temperature: 47℃±1℃ |
| Corrosion resistance test CASS | Laboratory temperature: 50℃±1℃ Saturated air barrel temperature: 63℃±1℃ |
Structural Assembly:
1. Test chamber material:
1.1 Chamber material: The inner and outer chambers are made of light gray impact-resistant PPR board, with a thickness of 10mm and a temperature resistance of about 85℃. The edge is surrounded by three-dimensional reinforcement with a thickness of 10mm, and the structure is firm.
1.2 The test chamber door is made of PPR board, with a 300*400 transparent observation window, and the edge is double-layered to prevent long-term high temperature distortion and deformation, with a thickness of 10mm. The door frame is sealed with silicone strips.
1.3 Frame strength: The base of the test chamber is made of 304 stainless steel square steel, and the internal skeleton is made of stainless steel angle iron and square steel.
1.4 Insulation thickness: 100mm hollow layer.
2, Liquid tank: Hidden integrated test tank, easy to clean and easy to operate.
3, Saturated air barrel: Made of 304 stainless steel, resistant to high pressure 3Kpa, good insulation effect. The internal heating pipe adopts electric heating pipe, and the water level control adopts float switch control, which is durable.
4, Sample placement: The test bench is made of heat-resistant ABS board with strong load-bearing capacity (200KG). Good water permeability, ensuring easy access to the generator (with casters)
5, Mobile casters: None
