Electronic Cantilever Beam Impact Testing Machine Polymer Material

Polymer Material Rubber Testing Equipment Electronic Cantilever Beam Impact Testing Machine

Polymer material electronic cantilever beam impact testing machine JD-CJY

First, product introduction

The plastic electronic cantilever beam impact tester is used to measure the impact toughness of non-metallic materials such as rigid plastics, reinforced nylon, glass reinforced plastics, ceramics, cast stone, plastic electrical appliances, and insulating materials. The plastic cantilever beam testing machine can be used for the cantilever beam impact test in the laboratory or inspection department of scientific research institutions, colleges and universities, non-metallic materials manufacturing plants and other units.

The plastic electronic cantilever beam impact testing machine adopts the rotary encoder garden grating angle measuring technology, which has the advantages of high precision, good stability and large measuring range. The digital display shows the thrust energy, impact strength, pre-angle angle, elevation angle and average. Value and energy loss are automatically corrected.

Second, the plastic cantilever beam test machine technical specifications:

(1) Impact speed: 3.5m/s

(2), pendulum energy: 1J 2.75J

5.5J

(3), pendulum angle: 150 ゚

(4), the distance from the center of the pendulum shaft of the plastic cantilever beam tester to the impact blade:

(5), pendulum force distance: 1J pendulum PL=0.5155N.m

2.75J pendulum PL=1.4177N.m

5.5J pendulum Pd5.5=2.8355N.m

11J pendulum Pd11=5.6711N.m

22J pendulum Pd22=11.3419N.m

(6), the distance from the impact blade to the upper jaw 22mm

(7), blade corner radius: R = 0.8mm

(8), electronic cantilever beam impact tester sample type: meet the requirements of GB1834-80 and ISO180-82 and JB/T8761_1998, ASTM256, GB/T 1843, GB/T 2611, JB/T 8761. The plastic cantilever beam testing machine is an impact testing machine with simple structure, convenient operation and high precision.