IEC 60529 45um pure Talcum Powder For IP Dust Chamber In Lab

Description of Talcum Powder

Talcum Powder for IP Dust Chamber in Lab,The medium used in the ip5x ip6x dust environmental chamber is Talcum powder. When the purpose of the sand and dust test is to simulate a sandstorm climate environment and a dusty environment, the tested sample can operate normally in such an environment, and it is a qualified product.

Parameter of Talcum Powder

Application of Talcum Powder

Talcum Powder for IP Dust Chamber in Lab Environmental simulation sand machine is also called the dust-proof test equipment. The chamber body is made of 304 stainless steel plate. The bottom of the equipment is equipped with a device that can replace the dust, which can easily replace the used dust. A vibration device is installed in the chamber, which can work alternately automatically to prevent dust from sticking to the box wall and condensing.

Solution to the agglomeration of talcum powder in the sand and dust test machine

1. Check whether the talcum powder is agglomerated and damp before use. If so, please replace it in time.

2. The agglomeration of talcum powder is mainly caused by the solidification of the chamber body due to water vapor, or it is easy to mold and agglomerate in humid weather, so the blowing sand Protection device needs to be installed in a room that is kept dry at all times.

3. Check whether the various accessories are abnormal before the test. The entire sand and dust test device must be clean and dry, especially the blower must be dry, otherwise the wind with water vapor will also cause the talcum powder to agglomerate.

4. If agglomeration of powder is found, report and replace it in time. If not, inform the manufacturer in time and let the relevant technical personnel handle it.

>>Sand and Duat Test Chamber