Laboratory 85℃ Walk In Thermal Testing Chamber Thermal Vacuum Chambers

Description of Thermal Testing Chamber

LIB INDUSTRY offers a range of prefabricated, tight-tolerance environmental walk-in rooms that are easy to ship and install.

Walk in thermal testing chamber major features include:

Forced air circulation systems distribute air evenly and constantly recirculate it, maintaining uniform and accurate temperatures and humidity.

Technical Specification of Thermal Testing Chamber

Details of the Advantage 

Workroom	Air Circulation
Safe Lock	Programmable Controller

Temperature Ranges are from -60°C to +120°C

WalkIn cooling chambers,refrigeration system meets the room's load demand and operates continuously in cooling mode. Single-stage mechanical units operate at -35°C and above and two-stage cascade units at below -35°C.

Thermotron testing chamber,Electric heating system provides very accurate and straight line control of temperatures. System is reliable and has a long life.

Features of Thermal Testing Chamber

1.Environmental simulation test chamber,Single door or double door, or according to customer’s requirement

2.Silicon rubber is used for high sealing effect, high / low temperature resistance, anti-aging, and good Sealed performance.

3.Lighting Device:moisture-proof & explosion-proof, can be directly manual switch controlled from the outside.

4.Height distance to the floor is 200mm; chamber base board is slightly slant with drain hole for letting out the condensed water.

5.Interior chamber floor contains many stiffeners, to enable the floor load capacity ≥500Kg / m2, wheel impact ability≥1MT;

6. Movable entry ramp is provided.

Related Products

Send an inquiry or a free solution!