|
[China]
Trade Verify
Address: No.1 Zhangba First Street, Xian High-Tech Area, Shaanxi, P.R. China 710065
Contact name:Serena
Xi'An LIB Environmental Simulation Industry |
|
Verified Suppliers
|
|
|
▶Description
Battery salt test chamber,If the battery system is used at the seaside or in a salty fog environment, the cabinet will appear rust, which will affect
The structural strength of the battery casing further affects the normal function and safety of the battery.
▶Products Parameters
| Name | IEC 60068-2-52 35°C 93% Relative Humidity Battery Salt Test Chamber |
| Model | S-010 |
| Internal dimensions | 1000*1300*600(mm) |
| Interior Volume (L) | 780 |
| Temperature range | Ambient ～60℃ |
| Humidity range | 95% ~ 98% RH |
| Temperature fluctuations | +/- 0.5 ℃ |
| Temperature deviation: | +/- 2.0 ℃ |
| Test time | 1~999 hours, settable |
| Spray deposition | 1～2ml / 80cm2 · h |
| Spray type | Continuous / Periodic |
| Temperature Controller | LED display, P.I.D+S.S.R. microcomputer integrated controller |
| Temperature sensor | PT100Ω / MV A-class |
| Salt fog collected | Fog collector and fog measure cylinder |
| salt water filtration | Salt water filter near the suction tubes( Avoid the nozzle blockage) |
| Salt water preheating | Saturated air barrel |
| Spraying system | Atomizer tower and Spray nozzles (Fog is more fine and uniform distribution) |
| Interior /Exterior material | Glass fiber reinforced plastics |
| Power Supply | 220V 50HZ |
Battery Salt Spray Test
IEC 60068-2-52 35°C 93% Relative Humidity Battery Salt Test Chamber
 | Judgment requirements for battery salt spray test: After the battery machine is subjected to the salt spray resistance test in the non-working state, the electrical connections should be free of oxidation and corrosion
|
Test Condition
IEC 60068-2-52 35°C 93% Relative Humidity Battery Salt Test Chamber
● Battry cycle salt water Test chamber:
● Salt spray fog
● Salt fog concentration: 5%
● Test temperature: 15~35℃
● Volume of spray: 1~2ml/h·80cm2
● PH: 6.5~7.2 (pH at 20±2℃)
● Temperature storage
● Relative humidity: 93% (RH)
● Test temperature: 40℃
● Residence time
● severity1:Each cycle performs 2 hours of salt water spray and 7 days of temperature storage, and a totally performed 4 cycles.
● severity2:Each cycle performs 2 hours of salt water spray and 20~22 hours, and a totally performed 3 cycles.
● Test tolerance
● Salt fog concentration: ±1%
● Test temperature: ±2℃
● Relative humidity: +2, -3%
>>>Click here for more details!>>>
