Active Member
|
[China]
Address: 14F,area C,building B,Qinghu science park,Longhua District, Shenzhen city,Guangdong province,China
Contact name:Aasin
Shenzhen Dallast Technology Co., Ltd. |
|
|
Hydraulic Cylinder, Double Acting Welded, Polished Chrome Piston Rod
The Double-Acting Hydraulic Cylinder (Simple) block represents a simplified version of a double-acting hydraulic cylinder, developed for applications where only the basic cylinder functionality must be reproduced, in exchange for better numerical efficiency. For these reasons, such factors as fluid compressibility, friction, and leakages are assumed to be negligible. The hard stops are assumed to be fully inelastic, to eliminate any possible oscillations at the end of the stroke. The model is especially suitable for real-time and HIL (hardware-in-the-loop) simulation, if such simplifications are acceptable.
Special Features:
| Model Type | piston type |
| Certificate | ISO9001&TS16949:2009 |
| Body Material | Steel |
| Shaft Diameter | Requirements |
| Pressure | 5MPa~36MPa |
| Total Stroke | Requirements |
| Surface Treatment | Chrome Plating |
| Working type | double acting |
| Application | Agriculture machine |
| Warranty | One year after shipping arrival |
| Payment terms | L/C, T/T, West Union |
| Delivery time | 15- 25 days after down payment |
Product Overviews
We can design and produce most kind hydraulic cylinder.Single
acting,double acting hydraulic cylinder.Big size and little size
hydraulic cylinder.3-6 stages Telescopic hydraulic cylinder.
(1) Construction Machinery cylinders for: loaders, excavator,
forklift, bulldozer, dumper, roller, crane ,pump truck,garbage
truck,garbage compactor and boat used hydraulic cylinder etc.
(2) Metallurgical Machinery cylinders for: decelerator, tile press
etc.
(3) Mining Machinery cylinders for: crasher, coal cutter shield
tunneling machine and dame gate etc.
(4) Agricultural & forestry machinery cylinders for: soil
preparation machine, harvester, weeder etc.
Product Process:
1. Raw materials entering the factory, 27SiMn, 40CrMo, ST52, 45# steel tubes or bars for choice
2. Do the pre-treatment including pickling, phosphating and saponification, and then cold-draw the seamless steel tubes.
3. Put the steel tubes into the tempering furnace to do the stress relief annealing in convenience of the subsequent the processing.
4. Multi-roll straightening machine, with 10 straightening points, achieves the automatic rolling straight improving the efficiency greatly
5. Heat treatment to obtain work pieces with different properties by changing their internal microstructure or surface chemical composition.
6. Cylindrical degree can be controlled within 0.03mm and the surface roughness is up to 0.4 by honing with range:φ40mm-φ450mm and longest length: 12000mm
