Transmission Line Angle Steel Tower , Hot Dip Galvanization Electric Power Tower

Transmission line Angle Steel Tower Hot Dip Galvanization Electric Power Tower

1.   Production decription

we are professional manufacturer of transmission angle steel towers used in high voltage AC and DC systems .

Heigth from 9m to 100m

Transmission angle steel towers Voltage from 10-1000KV

The transmission angle steel towers meet ASTM Standards,GB/T standards and related standards .

Steel grades
Tower legs: Chinese standard Q345B, which equal to ASTM A572 Grade 50
Others members: Chinese Q235B, which equal to ASTM A36
Bolts: Chinese grade 6.8 and 8.8, which equal to ASTM A394

Dimension and tolerance for angle : GB/T1591-1994, Equal to EN 10056-1/2
Hot dip galvanization: GB/T 13912-2002, which similar to ASTM A 123

The welding :AWS D1.1 or CWB standard

Qingdao Liangta Steel Structure Co.Ltd is a professional manufacturer in angle steel tower from the year 2009.

We use first class production line and have complete qualtiy control measurements.

1. We make sure every your requirement will be answered in 24 hours.

2. Customized design is available.our engineer can design drawings as your requirment.

3. After sales service. We can help to install the angle steel  tower .If needed ,we even can supply

an engineer to the site.

4. Professional factory direct :Best price and timely delivery can be assured.

5. Convenient transportation.Located near the Qingdao international sea port and airport.

The transportation cost is low.
 

2.   Product capacity

We have 5 auto production line for lattice steel towers Manufacturing,We can supply 3000 tons lattice steel tower

every month .Else we have enogh site for installing more production line if needed.

​

​3.   Technical support

Our engineer and drawer has lots of designing ,lofting experience of lattice steel towers .

Which we can supply a overall solution of all the towers .

4.   Quality control

We have very strict quality control in every angle steel towers .

                    Material incoming control:chemical and physical test

                                   Zinc coating thinknes inspection

We usually has two ways of trial assembly for lattice steel towers : trial assembly before galvanzation

and after galvanization.

6.  Hot dip galvanization and painting

7.   Package and delivery

Package we usually do as our clients requirment .Usually for angle steel towers,We use steel wire to make it into bundle and use special material to protect the Zinc.

8.   Company introduction

Qingdao Liangta Steel Structure Co., Ltd. ,established in year 2009,is a leading professional manufacturer in the field of transmission steel  towers (the voltage up to 1000kv), telecommunication towers, monopoles, substation structures and rooftop towers. We also supply steel profile products as per customers 'requirement.

The factory located in Jiaozhou bay of Qingdao, covered an area of over 60,000 square meters with an annual production capacity 40,000 tons.

Location:
Less than one hour drive from Qingdao International Airport, 1 hour drive from Qingdao sea port.

• Qualification Certificates:
• -Environmental Management System Certificate: ISO14001:2015
• -Quality Management Systems Certificate: ISO9001:2015
• -Established Occupational Health and Safety Management Systems Certificate: OHSAS 18001:2007

We also have many experiences of foreign projects, like Philippines, Myanmar, Iraq, Mauritania and so on.

Welcome to contact us ,we make sure your every question will be answered in time .

Certificate:

9.   Product catalogue: