76KG Roller Cone Drill Bit Drilling Through Soft - Ultrahard Formations IADC Classified

Classified According To IADC Roller Cone Bits For Underbalanced Drilling Conditions
 
Click here for catalogueTCI DRILL BIT.pdf
 
What is Roller Cone Bits

1. A roller cone or tricone rock bit consists of a bit body with three moveable conical rollers equipped with cemented carbide inserts.
2. The idea is the crush the rock by rolling the inserts against the rock with appropriate rotation speed and feed force.
3. Carbide inserts are distributed over the three rollers in such a manner that the entire bottom of the hole is worked on when the drill bit is rotated.
4. Roller bits for hard and abrasive rock generally have spherical cemented carbide inserts closely spaced.
5. Roller bits for softer rock may have the chisel and conical carbide teeth or quality milled steel teeth as the cutters.
6. Three types of cemented carbide inserts are used for roller type bits being Chisel, Conical, and Hemispherical.
7. A roller bit will utilize nozzles from which the compressed air escapes to lift the cuttings from the bottom of the hole.

 
All of our bits are manufactured according to strict standards, set forth by the American Petroleum Institute (API).
And classified according to characteristics set forth by the International Association of Drilling Contractors (IADC).
 
How to read an IADC Code properly

 
 
IADC 6 SERIES DRILL BITS
These bits are used to drill high-compressive strength, medium hard formations. A small amount of cone offset and low insert projection is used to prevent cutting structure damage when hard streaks are encountered. Increased numbers of blunter, smaller diameter inserts are used to increase life in harder, more abrasive formations.
IADC 7 SERIES DRILL BITS
These bits are used to drill hard and abrasive formations. A more wear-resistant grade of tungsten carbide insert is used to prevent wear. Low cone offset with increased numbers of breakage resistant cutters add to the required bit durability.
 
 
Application
 
Tricone drill bit is one of the main tools for blast hole and well drilling, mainly used for large-scale open-pit mining, such as open-pit coal mines, iron mines, copper mines and molybdenum mines, also the non-metallic mines. With the increasing in variety of type, it’s also widely used in quarrying, foundation clearing, hydrogeological drilling, coring, tunneling in railway transportation department and shaft drilling in underground mines. The rock breakage by the tricone bit which used in mine is working with both the impact of teeth and the shear caused by slippage of the teeth, which bring high rock breaking efficiency and the low operation cost.
 
 
Bits thread are manufactured according to API standards.
 

 
 
Advantage:
1. Strictly select the material to ensure the reliable quality. Bad steel and tungsten carbide inserts won't be used.
2. Strictly act according to the ISO9001 standard, and control by full-scale inspection.
3. Sales and support people are highly trained in the latest rock drilling technology and can offer you expert advice on what products will best fit a specific end use application.
 
More advantage as here:advantage of tci drill bit.pdf
 
Tianying's Best Service
1. 365×24 Year-round Service,We are committed to year-round 24-hour service even during holidays.
1. Provide professional technical services, including products introduction, selecting and problem solution etc.
3. Within 35 Working Days Quick Delivery.
 
We mainly provide Tricone Bits(TCI Drill Bits) for open pit mining.
a). Type: Tungsten Carbide Insert (TCI)
b). Formation Application: Soft to Hard Formation
c). Size Available: 7 7/8''~26''
d). Popular IADC Code: IADC545,645,725,735,745,825,835
 
Don’t see the bit you are looking for? Give us a call, we can customize any bit to fit your unique circumstances.
 
 
 
The above represents commonly available sizes and types, we do produce other sizes and types of rock drill bits which do not appear on . Please contact us for more information.