0.2-2m/Min VFD H Beam Welding Line For Assembly / Electron

Integral H Beam Welding Line for Assembly , Electron Beam Welder

Quick Details

• “Beam Welding Line” automatic, two heads submerged arc-welding lines for T / I girder beam.
• 2sets of American Lincon DC-1000, NA-3S SAW welding system to ensure good welding quality;
• Japan Mitsubishi PLC controller;
• Hydraulic type post deformation device to straighten the beam;
• The beam is fed into the machine and both sides of the beam are welded simultaneously.
• Save space and economize workshop; shorten the production time and improve the efficiency;
• Economize the investment of crane equipment and operator;

2. Main Parameters

*We reserve the right to alter specifications without prior notice.

3. Introduction

H-beam combination workstation is used for H-beam or T-beam assembly, welding and straightening. It centralize the assembly, welding and straightening functions on one machine which saves space and economize workshop.Reduce workflows: shorten the production time and improve the efficiency. Economize the investment of crane equipment and operator.

• These machines are specifically designed for the manufacture of welded “T” and double “T” girder-beams with parallel or converging flange.
• They enable the welding to be carried out on items with the web located vertically and without any need for tacking.
• Tacking will only be required at the top in order to obtain the proper angle between the web and the flange.
• When double “T” beams are being manufactured, once the first flange has been welded, the beam is flipped over and fed back into the unit once again.
• This machine is capable of welding both symmetrical and non-symmetrical beams without the need for tacking;
• A flange post-deformation device mounted at the machine exit enables the machine to compensate for any flange deformation resulting from the welding process.
• This device is easily adjustable to handle various flange dimensions and a variety of different deformable thicknesses up to a maximum of 40 mm at maximum width.
• The welding line can be equipped with a control PLC from Mitsubishi.

4. Reference Photos