|
[China]
Trade Verify
Address: No.15 Yanxiang Road,Yanqiao Supporting Area,Wuxi,Jiangsu,China
Contact name:Lynn
Wuxi Tain Turbocharger Co.,LTD |
|
Verified Suppliers
|
|
|
RHF5 VJ26 VJ33 turbocharger cartridge for FORD Ranger Double Cab 2.5L
PRODUCT DESCRIPTION
| Turbine Wheels | ||
| (A) Inducer | (B) Exducer | Blades |
| 45 | 40.3 | 8 |
| Compressor Wheels | ||
| (A) Inducer | (B) Exducer | Blades |
| 36.6 | 52.5 | 10 |
⇒P/N
VJ26 , VJ33 |
⇒CHRA NO
VJ33
⇒Engine NO
XN349G348AB,VA430013 ,VB430013
⇒Application
Ford ranger 2.5L J97A
Mazda B2500 2.5L J97A
⇒Balancing Test
<0.5Mg.mm / 150000RPM
⇒Condition
Brand new
Our turbo cores are 100% balancing tested by SCHENCK TB-Sonio.
What is a Turbo CHRA?
A complete turbocharger is essentially a Centre Housing Rotating
Assembly (CHRA or core assembly) with housings fitted to
each side. The turbine housing directs exhaust gas to power the
turbine wheel, the compressor housing directs air into the
engine. The turbine housing will have a wastegate to control the
turbine speed, or as is more common on diesel engines, there
is a variable vane mechanism giving much better control of the
turbo, reducing lag, and improving performance. The wastegate
or vane mechanism is controlled by an actuator – which could be
controlled either electronically or by a vacuum system.
The CHRA is a rotor (turbine wheel on one side, compressor wheel on
the other) that is held in a bearing system allowing it to
rotate at high speed on a pressurized oil film similar to the
engine. Turbo remanufacturer’s traditionally stripped the complete
turbocharger and CHRA, examine all the individual components,
replacing these where necessary, and install brand new
bearings and seals.
