|
[China]
Trade Verify
Address: No.15 Yanxiang Road,Yanqiao Supporting Area,Wuxi,Jiangsu,China
Contact name:Lynn
Wuxi Tain Turbocharger Co.,LTD |
|
Verified Suppliers
|
|
|
PRODUCT DESCRIPTION
⇒P/N
17201-54030 , 17201-54060
⇒CHRA NO
17202-54030
⇒Engine NO
17201-54030 ,CT20WCLD , 17201-54060
⇒Application
Toyota Landcruiser / Hilux / Hiace 2.4L 90HP 1995 2L-T
⇒Balancing Test
<0.5Mg.mm / 150000RPM
⇒Condition
Brand new
Our turbo cores are 100% balancing tested by SCHENCK TB-Sonio.
| Turbine Wheels | ||
| (A) Inducer | (B) Exducer | Blades |
| 59.7 | 48 | 10 |
| Compressor Wheels | ||
| (A) Inducer | (B) Exducer | Blades |
| 39 | 57 | 5/5 |
What is a CHRA?
A complete turbocharger is essentially a Centre Housing Rotating
Assembly (CHRA or core assembly) with housings fitted to
each side. The turbine housing directs exhaust gas to power the turbine wheel, the compressor housing directs air into the
engine. The turbine housing will have a wastegate to control the turbine speed, or as is more common on diesel engines, there
is a variable vane mechanism giving much better control of the turbo, reducing lag, and improving performance.
The wastegate or vane mechanism is controlled by an actuator – which could be controlled either electronically or by a vacuum
system. The CHRA is a rotor (turbine wheel on one side, compressor wheel on the other) that is held in a bearing system
allowing it to rotate at high speed on a pressurized oil film similar to the engine. Turbo remanufacturer’s traditionally stripped
the complete turbocharger and CHRA, examine all the individual components, replacing these where necessary, and install
brand new bearings and seals.
