|
[China]
Trade Verify
Address: DongGuan,Guangdong,China
Contact name:Eva
Dongguan Haiyuan Water Treatment Co., Ltd. |
|
Verified Suppliers
|
|
|
Marine Salt Sea Water Desalination Plant Water Desalination Plant Price Seawater Desalination for boat
1. sea water desalination plant use automatic control and semi-control .Pretreatment parts can adopt fiber glass or stainless steel material.
2.sea water treatment has protected when no power, poor power, larger electrical current, leakage, short circuit.
3. sea water desalination system is compact, easy installation.
4. Desaliantio plant equipped with manual and auto control based on user needed.
5. desalination systemproduce as per ISO and SGS standard and main parts accessories have obtained CE certification.
6. All the plants will be commissioning well. Make sure don't have any problem when arrived site.
7.What we provide not only the good products, but also our whole team, the quality, experience, and service.
Salted water is not always the same. Depending on whether they come
from warm or cold oceans, closed or open seas, their salt content
will vary. This is a short comparison between samples:
Brackish water:0,5 to 10
g/l, (TDS range:
2000ppm to 20000ppm)
Northern Sea close to estuaries :21 g/l (TDS range:
10000ppm to 21000ppm)
Atlantic Ocean :35
g/l (TDS
35000ppm)
Mediterranean Sea :38 g/l (TDS 38000ppm)
Arabian Sea :45
g/l (TDS45000ppm)
Red
sea: 41g/L (TDS
41000ppm)
Dead Sea :300
g/l. (TDS
300,000ppm)
Different Water TDS(Total Dissolved Solids) compare and usage
| Raw water/ Application | Bottled water, Bag water | City tap water | Brackish water | Seawater |
| TDS Range | 2-10ppm | 100-1000ppm | 2000-20000ppm | 20000-40000ppm |
| Direct Drinking | Yes | Yes/No | No | No |
| Cooking, human consumption, washing | Yes | Yes | No | No |
| Irrigation, Industry, Animal Drinking | Yes | Yes | No | No |
SWRO Process steps introduction
| Pre-treatment | Feed water pump, Stainless steel 316L | Provide pressure for filters; |
| Quartz sand filter | Remove suspended particle and large impurity. In this system; | |
| Active Carbon Filter (option) | Remove the color, free chloride, organic matter, harmful matter, ect; | |
| Anti-scalant system | To add chemicals to remove some impurities and prolong thememebranes using/washing time(prevent membrane blocking) | |
| Manual/Auto control valves | Flushing sand/carbon filter after some time | |
| 5micron filter | Remove larger than 5 micro colloids in the water. In this system | |
| 1micron filter | Remove larger than 1 micro colloids in the water. In this system | |
| Seawater RO Main Part | High pressure pump, Stainless steel 316L | Provide the high pressure to RO membrane; |
| Ro membranes | More than 98% desalination rate, can remove ions except H2O. | |
| CIP system | To washing the membranes when it is blocked after using for long time | |
| Electronic control panel | PC controller or PLC and HMI controller |
SWRO process flow chart:
| HY-SWRO-500L/hr (10m3/D) | |||
| Flow rate | 10000L/day | Recovery rate | 30% |
| Applicable power | 380V/50HZ 3 phase | Rated power | 4 KW |
| Feedwater TDS | <45000ppm | freshwater TDS | <600ppm |
| Working pressure | 60 bar | operating temperature | 5-45ºC |
| Feedwater residual chlorine | <0.1ppm | Feedwater SDI | <5 |
| Feedwater turbidity | <1NTU | Feedwater PH value | 3-10 NTU |
| RO membrane housing | 4040, 4 piece | RO membrane | 4 piece |
| plant specification | 1.2X1.2X1.65(m) | Net weight | 330Kg |
| Packing specification(Plywood) | 1.3X1.3X1.75(cm) | Gross weight | 350Kg |
Related SWRO 
