Active Member
|
[China]
Address: Floor 4, NO.25-29,Power Station Road, Xihu , Shilong Town , Dongguan 523325, China.
Contact name:Amy
Guangdong Uchi Technology Co.,Ltd |
|
|
OBV-I30 data:
| Uc(maximum continuous operating voltage) | 320V |
| Up(voltage protection level) | ≤1.9kv |
| suitable power system | 1-N/E, single phase |
| Response time | ≤100ns |
| Indication | LED indication |
| Housing Material | thermoplastic material |
| Housing self-extinguishing class | UL94_V0 |
| Temperature range | -40℃～+70℃ |
| humidity range | 5%RH～95%RH |
| Elevational | ≤2000m |
| Method of connecting wire | Parallel Connect |
| Thread Dimensions | 4～35mm2 |
| Mounting method | DIN:35mm |
| IP(degree of protection of enclosure) | IP20 |
| Follow up standard | IEC 61643-11 |
Features:
1. High flow capacity, discharge capacity of 25/30kA (10/350μs)
2. Suitable for the first level protection Low limit voltage, good
protection effect, no continuous current generation, no impact on
the power grid
3. There is no spark in the process of lightning strike, which can
be used in a variety of complex environments
4. Built-in thermal tripping protection device, can be disconnected
in time, safe and reliable
5. LED status indicator, can directly monitor the performance of
internal circuit
6. Small size, easy to install and use
Advantages:
1. Five years of hard work to develop We spent 5 years
working on developing SPD.
2. The failure indication window is electronic
Electronic failure indication window
3. The flow capacity of the traditional structure is 25kA, now it
is improved to 30kA(10/350μs).
Design philosophy
The product is a single-phase switching surge protector designed and produced in strict accordance with IEC61643 standards. It passed the Ⅰ test (T1), the flow capacity is large, especially suitable for non-exposed, exposed environment first level lightning overvoltage protection. The protection chip adopts multi-gap cermet protection device to improve the arc discharge voltage. When the lightning overvoltage passes, the peak voltage of the power supply is lower than the arc discharge voltage of the module, it will stop working and extinguish the arc and resume the off state. Therefore, the products using this technology can not only reliably protect the lightning strike and the operating overvoltage of the power system, but also effectively solve the continuous current problem of the switch surge protector, without bringing impact to the power grid.
