Home Companies Britec Electric Co., Ltd.

TUV BR-50GR 50Ka Surge Protection Devices 3 Phase Spd type 1 Lightning Arrester

Britec Electric Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600

Contact name:Macy Jin

Inquir Now

Britec Electric Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

TUV BR-50GR 50Ka Surge Protection Devices 3 Phase Spd type 1 Lightning Arrester

Country/Region china
City & Province zhejiang
Categories Lightning Rod
InquireNow

Product Details

50 Ka Surge Protection Devices 3 Phase BR-50GR Below Zero 40℃-80℃ Range

 

50 Ka Surge Protection Devices Features:
 

Type 1: Surge protection devices that can discharge partial lightning current of typically 10/350µs waveform. They are installed before the main isolation device in the load center, typically between the transformer’s secondary and load center’s main circuit breaker. They are used in building with an installed lightning protection system and can protect partial lightning currents resultingfrom direct hit lightnings. Type 1 devices usually use spark gap technology and are commonly referred to as surge arresters.

 

50 Ka Surge Protection Devices Technology characteristic:

 

 

SpecificationBR-50GR 3P
Item nameSurge Arrester
SPD dassification according to EN61643-11Type 1 + Type 2
SPD dassification according to IEC61643-11Class I + Class II
Max continuous 0perating a.c. voltage                     Uc275V
Lightning impulse current (10/350µs)                     limp50kA
Norminal discharge current (8/20µs)                         In50kA
Maximun discharge current (8/20µs)                    Imax160kA
Voltage protection level                                            Up≤1.8kV
Follow current extinguishing capability a.c.               lifi3kA rms
Max. backup fuse500A gG
Response time                                                          tA≤100ns
For mounting on35mm Din rail
Degree of protectionIP20
Operating temperature range                                   Tu-40℃—80℃
Cross-section area (Min.)4mm²
Cross-section area (Max.)35mm²
Enclosure materialThermoplastic UL94-V0

 

 

 

50 Ka Surge Protection Devices Application:

 

• Used in the lightning protection zones concept at boundary LPZ0B-LPZ1.
• For protecting low-voltage consumer's installations against indirect lightning discharges.
• Protect electrical and electronic equipment against transients, originating from lightning, switching of transformers, lighting, and motors.
 
50 Ka Surge Protection Devices Advantage:
 
• Unique designing, patent technology.
• High discharge capacity.
• Low residual voltage.
• DIN rail mountable and ease of installation.
• Quick thermal response self-protected design.
 
Our Services:
 
• 20 years global leading profession manufacture of electrical products surge arrester.
• All products will be well packed before shipping.
• Standard packaging, and you can also tell us your own requirements on packaging.
• Faster delivery.
• Individually Tested Prior to Shipment.
 
50 kA Surge Protection Devices Installation:
 
• Installed at the entrance point of the building, in the main distribution board of this installation.
• It should be used as part of lightning protection systems i.e. when lightning rods or meshed cages are installed.
• Must install SPD strictly according to the wiring diagram provided.
• Better to under the guidance of professional electrician.
• Green tab, normal work status, Red tab, failure status, need to be replaced Rapidly.
 
Shipping:
 
 
Company information:
 
Wenzhou Britec Electric Co., Ltd. is located in the Yueqing city. Britec is dedicated to development, manufacture, marketing and service of low voltage surge arrester products. The rapidly-developed regional economy and friendly investment environment ensure Britec’s sustainable developments and continuous innovations. It is professional in producing SPD.
 
 
FAQ:
 

Q1. Are you manufacturer or trading office?

  A: We are manufacturer in Wenzhou, with the ability to export by ourselves.

 

Q2: Do you support OEM or ODM?

  A: Yes, we support OEM & ODM.

 

Q3: How's your product markets?

  A: Our products are welcomed among Europe, South America, Asia and certain countries in Africa, win us a good reputation.

 

Q4. How’s your warranty?

  A: All our products are 2-year warranted.

 

 

Hot Products

50 Ka Surge Protection Devices 3 Phase BR-50GR Below Zero 40℃-80℃ Range 50 Ka Surge Protection ...
Type 1 25kA Lightning Surge Arrester Module surge voltage protector ac SPD surge voltage protector ...
50ka 1 single Phase Type 1 Surge protective device TUV BR-50GR 1+1 Class 1 Type 1 Surge Protection ...
50 kA Surge Protection Devices single surge protector type 1 SPD Surge Protection Devices Features: ...
50 kA Surge Protection Devices single surge protector type 1 SPD Surge Protection Devices Features: ...
50 kA Surge Protection Devices single surge protector type 1 SPD Surge Protection Devices Features: ...