Active Member
|
[China]
Address: Jili Industrial Zone, Nanzhuang Town, Chancheng Area, Foshan City, Guangdong, P.R.China.
Contact name:Iris Chan
Foshan Jiabao Shelf Manufacturing Co.,Ltd. |
|
|
Heavy Load Pallet Storage Warehouse , Teardrop Warehouse Pallet Shelves
Pallet Storage Warehouse Introduction
1. Warehouse Pallet Shelves consist of column, beam, supported
bracing, row spacer, footplate. The structure is simple.
2. Low cost , the widest use warehouse rack.
3. 100% selective.
4. Beam hieht is free adjustable, can satisfy different height of
palletized goods.
5. The bottom of pallet rack can modify to shelving rack, fully
realize manual selective.
6. Low standard on floor.
7. The material handling is high efficient.
Warehouse Pallet Shelves Type
Drive-in Rack
Mezzanine Rack
Cantilever Rack
Warehouse Pallet Shelves Paramter
| JB-10 Warehouse Pallet Shelves | Length Size | 2300mm,2500mm,2700mm,3000mm,3300mm,3600mm |
| Wide Size | 900mm,1000mm,1100mm,1200mm | |
| High Size | 2000mm,2500mm,3000mm,3500mm, 4000mm,4500mm,5000mm,5500mm,6000mm | |
| Column | 100x70x2.2mm | |
| Beam | 1.5mm | |
| Columns pitch | 75mm distance | |
| Components | Columns, Beam, safety pin | |
| Load Capacity | 700-4000kg/level | |
| Color | Blue color columns and Orange color beam |
| Operating-Tool | Manual | Pallet stacker | Counter-balanced Truck | Reach Truck | VNA Forklift | Crane Stacker |
| Aisle width(mm) | 800-1500 | 2300-2500 | 3000-3500 | 2700-3000 | 1500-1800 | 1300-1800 |
| Racking height(mm) | 2500(5000) | 5000 | 7000 | 9000 | 12000 | 24000 |
| Racking Sytem | Shelf, Multi-tier, Flow Rack, Cantilever | Pallet Racking, Drive-in Racking | Pallet Racking, Drive-in Racking | Pallet Racking, Drive-in Racking | Pallet Racking | Pallet Racking, Cantilever Rack |
| Remarks: For reference only, details design will be based on the application. | ||||||
Buyer's Attention
Buyer Must Know, when supplier send you the material thickness, is it the raw material thickness or after powder coated thickness.
If one supplier quote you thickness 2.0mm before powder coated, other quote you thickness 2.0mm after powder coated. Which one you will choose? Which one is more favorable for you if at same price? Absolutely the first one. If you are not sure , you can ask for a beam with cutting parts for sample check.
