|
[China]
Trade Verify
Address: Superisys (Wuhan) China: 12-1B, Liandong U Valley, Yangluo Development Zone, Wuhan
Contact name:justin kong
Superisys (Wuhan) Intelligent Technology Co., Ltd |
|
Verified Suppliers
|
|
|
IACM-DI8P-IOL-M8,IOLINK Slave Station,16 Digital Input/Output M8 Series
Product characteristics
The 8-channel analog input/Output series IOLINK slave station is a distributed AIO module with M12 standard interface
Current/voltage data can be collected
With IP67 protection grade, simple wiring, open connection
Easy to expand, simple equipment replacement and other features
The main station can store data and have diagnostic instructions for easy maintenance and debugging
| IO-LINK | polarity | model | product description | l/o connection mode | ||||
| Class A | PNP | IACM-DI8P-IOL-M8 | IACM-DI8N-IOL-M8 | IACM-DIO8P-IOL-M8 | IO-LINK slave module 8x port IP67 protection class | M8,3pin hole holder, A code | ||
| NPN | IACM-DO8P-IOL-M8 | IACM-DO8N-IOL-M8 | IACM-DIO8N-IOL-M8 | |||||
| I0-Link slave parameters | ||||||||
| Number of IO-Link ports | 1x device | |||||||
| lO-Link deals with data length | Two input bytes | Two output bytes | Two input bytes | |||||
| Two output bytes | ||||||||
| Minimum cycle period | 3 ms | |||||||
| Digital input and output parameters | ||||||||
| Number of inputs and outputs | 8 inputs | 8 outputs | 8 way adaptive | |||||
| rated operational voltage | 18…30V DC | |||||||
| Maximum load current (sensor) | 200 mA | — | 200 mA | |||||
| Maximum load current (actuator) | 500 mA | 500 mA | ||||||
| Total current UI | <1.6A | — | <1.6A | |||||
| Total current UO | — | <2.5A | <2.5A | |||||
| Module indicator light | ||||||||
| IO-LINK RUN | Green: communication is not connected | |||||||
| Green flash: communication is normal | ||||||||
| Red: communication interruption | ||||||||
| I/o | Green: the channel signal is normal | |||||||
| Red: port failure | ||||||||
| I/O port pin definition | ||||||||
| port |  | | | |||||
| M12 | ||||||||
| A-code mother end | ||||||||
| Address distribution | ||||||||
 | ||||||||
| underlying parameter | ||||||||
 | shell material | PA6+GF | ||||||
| shell color | black | |||||||
| level of protection | IP67, epoxy full potting | |||||||
| boundary dimension | 155mm×53mm×28.7mm | |||||||
| weight | 227g | |||||||
| operating temperature | -25℃…70℃ | |||||||
| Storage/transport temperature | -40℃…85℃ | |||||||
| operation humidity | 5%…95% | |||||||
| Store/transport humidity | 5%95% | |||||||
| Operating atmospheric pressure | 80KPa…106KPa | |||||||
| Store/transport atmospheric pressure | 80KPa…106KPa | |||||||
| IVO mouth tightening torque | M12:0.5Nm | |||||||
| application environment | In accordance with EN-61131 | |||||||
| vibration measurement | Comply with IEC60068-2 | |||||||
| impact test | Comply with IEC60068-27 | |||||||
| Free drop test | Comply with IEC60068-32 | |||||||
| Electromagnetic compatibility (EMC) | Comply with IEC61000-4-2,-3,-4 | |||||||
| authentication | CE,RoHS | |||||||
| Mounting hole specification | Ø4.3mm×4 | |||||||
| Auxiliary power port pin definition | ||||||||
 | auxiliary power supply | Power connection mode | M12, 5-core, L-code, male/female head | |||||
| port | System supply voltage us | 18…30 VDC(type.24VDC) | ||||||
| M12 | Auxiliary power supply voltage ua | 18…30 VDC(type.24VDC) | ||||||
| L-code | Total current Is | 12A | ||||||
| male end | Total current la | 12A | ||||||
| Definition of stitch | Static operating current Ic | ≤150mA | ||||||
| Power reverse connection protection | have | |||||||
| Power port tightening torque | M12:0.5Nm | |||||||
