|
[China]
Trade Verify
Address: Superisys (Wuhan) China: 12-1B, Liandong U Valley, Yangluo Development Zone, Wuhan
Contact name:justin kong
Superisys (Wuhan) Intelligent Technology Co., Ltd |
|
Verified Suppliers
|
|
|
IACM-IOLM8A-ECT/PN,IO LINK Main Station,8-Port Series
Product characteristics
4-port series IO LINK master device supports multiple fieldbus protocols,
These include Profinet, EtherCat, and EtherNet-IP protocols
Supports up to 4 IO-Link slave devices (including RFID and DIO slave devices)
Supports communication and power cascade between multiple master stations
Comply with IO-Link technology V1.1 specification
| model | IACM-IOLM8A-ECT | IACM-IOLM8A-PN | IACM-IOLM8A-EIP | IACM-IOLM4A4B-ECT | IACM-IOLM4A4B-PN | IACM-IOLM4A4B-EIP |
| communication protocol |  |  |  | | | |
| product description | IO-LINK master module | IO-LINK master module | ||||
| 8 Class A port | 4 Class A port | |||||
| IP67 protection class | 4 Class B port | |||||
| IP67 protection class | ||||||
| I/O connection mode | M12, 5pin hole holder, A code | |||||
| I0-Link master parameters | ||||||
| Number of master stations | The maximum configurable 8 ports | |||||
| Master connection mode | M12, 5-core, A-code, female head | |||||
| lO-link version | V1.1.2 | |||||
| Communication rate | COM1:4.8KBps | |||||
| COM2;38.4KBps | ||||||
| COM3:230.4KBps | ||||||
| The port voltage is L+ | type.24VDC(via US) | |||||
| The port current is L+ | 2A(via US) | |||||
| ClassB auxiliary voltage | - | type.24VDC(via UA) | ||||
| ClassB auxiliary voltage | - | 2A(via UA) | ||||
| Class A | 8口,X1.….X8 | 4口,X1…X4 | ||||
| Class B | - | 4口,X5.….X8 | ||||
| Master-slave communication distance | ≤20 meters | |||||
| Master-master communication distance | ≤100meters | |||||
| Digital input and output parameters | ||||||
| Number of inputs | 8 way, adaptive | 4 way, adaptive | ||||
| Input port location | X1…X8 | X1…X4 | ||||
| Polarity of input | PNP | |||||
| Signal "0" voltage | -0.3…5VDC | |||||
| Signal "1" voltage | 12…30VDC | |||||
| incoming current | type.5mA(via US) | |||||
| Number of outputs | 8 way, adaptive | 4 way, adaptive | ||||
| Output port location | X1…X8 | X1…X4 | ||||
| Polarity of input | PNP | |||||
| current output | Single channel 2A(via UA) | |||||
| Port protection | Power short circuit protection, power supply port overload protection | |||||
| Module indicator light | ||||||
| EtherCat Protocol | ProfiNet protocol | EtherNet/IP protocol | ||||
| PWR | Green: the module power supply is normal | |||||
| Red: module power reverse connection | ||||||
| I/O | Green: the channel signal is normal | |||||
| Red: port power supply short circuit | ||||||
| LINK | Green: The link is working | |||||
| Huang Shan: The link is normal. The data communication is normal | ||||||
| Out: No link was established | ||||||
| RUN | Green: OP status | SF | Red: module failure | MS | Green: The module is in normal condition | |
| Green slow flash: SAFEOP status | Green flash: Module is not configured | |||||
| Green flash: Pre-OP state | BF | Red: Internal error | Red: module failure | |||
| Extinguished: Init state | Red flash: device name / | NS | Green: network status is normal | |||
| ERR | Red flash: Communication error occurred | IP address | Green flash: Communication is not established | |||
| Extinguished: The state of the module is normal | Module group status error | Red flash: communication interruption | ||||
| IO-LINK | Green: port operation (running) state | |||||
| Green Flash: Port connection process or wrong device | ||||||
| Green slow flash: The port is in a pre-operational state | ||||||
| Green off: The port is closed | ||||||
| I/O port pin definition | ||||||
| ports | Definition of stitch | Address distribution | ||||
| M12 |  |  |  |  | ||
| A-code mother end | ||||||
| Data port pin definition | ||||||
| M12 | connection type | 2×M12 D-code; 4-core hole holder; |  | |||
| D-code | physical layer | Ethernet | ||||
| female connector | transmission speed | 10/100 Mbps, full duplex | ||||
| character | Protocol conformance | |||||
| warning function | Diagnostic alarm, process alarm | |||||
| minimum cycle time | 1ms | |||||
| Communication port tightening torque | M12:0.5Nm | |||||
| underlying parameter | ||||||
 | shell material | aluminium alloy | ||||
| shell color | Metallic silver primary color | |||||
| level of protection | IP67, epoxy full potting | |||||
| boundary dimension | 205mm×60mm×34.4mm | |||||
| weight | 515g | |||||
| Operating Temperature Range | -25℃…70℃ | |||||
| Storage/transport temperature | -40℃…85℃ | |||||
| operation humidity | 5%…95% | |||||
| Store/transport humidity | 5%…95% | |||||
| Operating atmospheric pressure | 80KPa…106KPa | |||||
| Store/transport atmospheric pressure | 80KPa…106KPa | |||||
| IVO mouth tightening torque | M12:0.5Nm | |||||
| application environment | In accordance with EN-61131 | |||||
| vibration measurement | Comply with IEC60068-2 | |||||
| impact test | Comply with IEC60068-27 | |||||
| Free drop test | Comply with IEC60068-32 | |||||
| Electromagnetic compatibility (EMC) | Comply with IEC61000-4-2,-3,-4 | |||||
| authentication | CE,RoHS | |||||
| Mounting hole specification | ∅4.5mmx1；∅5.5mmx1 | |||||
| Auxiliary power port pin definition | ||||||
| auxiliary power supply port M12 L-codeFemale & male end Definition of stitch | Power connection mode | M12, 5-core, L-code, male/female head |  | |||
| System supply voltage us | 18…30 VDC(type.24VDC) | |||||
| Auxiliary power supply voltage ua | 18…30 VDC(type.24VDC) | |||||
| Total current Is | 12A | |||||
| Total current la | 12A | |||||
| Static operating current Ic | ≤150mA | |||||
| Power reverse connection protection | have | |||||
| Power port tightening torque | M12:0.5Nm | |||||
