Superisys (Wuhan) Intelligent Technology Co., Ltd |
Verified Suppliers
|
|
SR-TD-BS30,Background Suppression Type Photoelectric Switch,
Main features:
Built-in micro amplifier NPN/PNP, dark/bright output
Various dimensions to meet different installation requirements
High response frequency: above 1kHz (average is 3KHz)
Wide voltage: 5-24VDC
Through the red indicator, you can confirm the working status
Wire 2 meters or connector type
model | SR-TD-BS30-NS | SR-TD-BS30-PS | SR-TD-BS30-NS-P3 | SR-TD-BS30-PS-P3 |
connection type | Linear output (2M) | Connector type (M8) | ||
output mode | NPN,NO/NC | PNP,NO/NC | NPN,NO/NC | PNP,NO/NC |
Detection mode | BGS direct reflection | |||
Size (mm) | 32*21*12 | |||
detect distance | 15~300mm | |||
Standard detector | White paper 100*100mm | |||
Reflectance black and white deviation | Set the distance below 10% | |||
dead zone | ≤15mm (black paper 6% reflectivity) | |||
spot diameter | At a distance of 100mm, the spot is about φ8mm | |||
light source | Red light 650mm | |||
Return range | Less than 2% of the movement distance (use white matte paper) | |||
repeatability | Detection axis: below 1mm, perpendicular to the detection axis: below 0.2mm (use white matte paper) | |||
mains input | 12-24VDC, pulsation (p-p) less than 10% | |||
Current Consumption | Below 30mA | |||
load current | ≤100mA | |||
circuit protection | Short circuit protection, power reverse polarity protection, output reverse polarity protection | |||
Residual pressure drop | Below 2V (100mA inflow current) | |||
answering time | Action, reply each 1ms | |||
set distance | 6 turns of regulation | |||
State switch mode | State mode switch: Select D/L function | |||
indicator light | Action indicator: red LED; Power indicator: green LED | |||
environment temperature | When used: -25℃~+55℃ (no ice), storage: -30℃~+70℃ (no ice) | |||
ambient humidity | Use: 35~85%RH (no condensation), storage: 35~95%RH (no condensation) | |||
Ambient illumination | Sunlight: 10000Lx, incandescent lamp: 3000Lx | |||
withstand voltage | 1000V AC, 50/60Hz, 1min charging between the whole and the shell | |||
dielectric strength | More than 20MΩ (DC500V meter) charging part between the whole and the shell | |||
Durable vibration | Durability: 10~55Hz, complex amplitude 1.5mm, X, Y, Z each direction 2H | |||
level of protection | IEC specification IP65 | |||
texture | Shell: PBT+PC, lens: PMMA |