Home Companies Sichuan Sunshine Plastics Co., LTD.

Flexible TPEE Polymer , High Performance Grade TPEE Plastic Raw Material

Contact Us

[China]

Trade Verify

Address: No.169，yinghuashan road，shifang economic development zoon（south），sichuan province，China

Contact name:Mark Yang

Sichuan Sunshine Plastics Co., LTD.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Flexible TPEE Polymer , High Performance Grade TPEE Plastic Raw Material

Country/Region	china
City & Province	sichuan

Product Details

HIGH PERFORMANCE GRADE TPEE MATERIAL

TPEE materials are block copolymers consisting of a hard segment of polyester and a soft segment based on polyether or polyester.among which, polyether soft segment and non crystalline polyester comprise amorphous phase while polyester hard segment partly crystallizes to form crystal domain as physical crosslink point.

TPEE materials combines the desirable elasticity of rubber and the strength of engineering plastics. Compared with rubber, it shows better processing properties and longer service life. The soft segment endows elasticity for TPEE and makes it act like rubber while the hard segment endows processing properties to make it just like plastics. In contrast to engineering plastics, TPEE exhibits same good strength but better flexibility and dynamic mechanical properties.

High performance grade SUNPRENETPEE materials exhibit high structural strength, favorable melt strength, good resistance to creep, impact, flex fatigue and abrasion, outstanding toughness, resilience and good dimensional stability. They have flexibility at low temperatures; and good retention of properties at elevated temperatures. The use temperature ranges from －50℃～＋180℃. In addition, the grades could resist the corrosion caused by some industrial chemicals, oils and solvents.

Physical Properties		Shore Hardness	Density	Tensile Strength	Elongation at Break	Flexural Modulus	Tear Strength	Melting Point	Melt Flow Index
Unit		HD(3S)	g/cm3	Mpa ≥	% ≥	Mpa ≥	kN·m-1 ≥	℃	g/10min
Test Methods		ISO868	ISO1183	ISO527-1	ISO527-1	ISO178	ISO34	ISO3146	ISO1133
High performance grades	H2525	26	1.10	20	1200	20	65	169	9±3
	H3030	31	1.11	25	1000	23	80	173	10±3
	H3035	35	1.12	29	1000	30	85	182	12±3
	H4040	39	1.12	26	900	30	75	176	7±2
	H2040	40	1.12	30	900	40	90	186	12±3
	H4543	43	1.15	30	850	60	100	184	12±3
	H5550	48	1.18	36	750	90	125	190	10±3
	H605	53	1.20	40	650	120	135	192	13±3
	H6555	55	1.21	42	650	140	150	200	12±3
	H7563	63	1.23	44	550	250	170	202	11±3
	H7560Y	60	1.23	42	650	210	155	202	10±2
	H8570Y	69	1.27	46	500	400	190	208	8±2
	H9275Y	74	1.29	48	450	600	220	215	8±2