|
[China]
Trade Verify
Address: E-commerce Industrial Park, High-tech Zone, Zhengzhou City, Henan Province, China
Contact name:Destiny.Huang
Zhengzhou Shenlong Pump Industry CO.,Ltd |
|
Verified Suppliers
|
|
|
30hp 35hp 40hp 50hp 60hp 75hp 85hp 100hp Water Deep Well Submersible Pump Price
Pump overview :
QJ deep well submersible pump is widely used in farmland irrigation, spray irrigation, water supply system for industrial buildings and civil buildings, water distribution system in mountain areas, low-lying areas and dunes, water supply and water drainage system for mines in urban or rural districts, and other water conservancy facilities.
Deep well submersible pump materials:
Deep well submersible pump features:
Deep well submersible pump pictures:
Deep well submersible pump parameters:
| Model | Motor Power | Flow range | Meter range | Outlet size | Rated current | |
| QJ Series | (kW) | HP | m3/h | (m) | Inch (") | A |
| 175QJ10-121/9 | 7.5 | 10 | 9/11 | 96-140 | 1.2" | 18.4 |
| 175QJ10-135/10 | 9.2 | 13 | 9/11 | 130-140 | 1.2" | 22.1 |
| 175QJ10-150/11 | 9.2 | 13 | 9/11 | 144-146 | 1.2" | 22.1 |
| 175QJ10-165/12 | 11 | 15 | 9/11 | 158-172 | 1.2" | 26.1 |
| 175QJ10-180/13 | 11 | 15 | 9/11 | 173-187 | 1.2" | 26.1 |
| 175QJ10-195/14 | 13 | 18 | 9/11 | 187-203 | 1.2" | 30.1 |
| 175QJ20-143/11 | 15 | 20 | 18-22 | 120-165 | 2" | 49.7 |
| 200QJ15-81/6 | 7.5 | 10 | 13-17 | 68-92 | 3" | 18 |
| 200QJ20-93/7 | 10 | 14 | 18-22 | 79-107 | 2" | 24.7 |
| 200QJ20-108/8 | 13 | 18 | 18-22 | 92-125 | 2" | 29.7 |
| 200QJ20-121/9 | 13 | 18 | 18-22 | 103-140 | 2" | 29.7 |
| 200QJ20-135/10 | 15 | 20 | 18-22 | 115-156 | 2" | 33.9 |
| 200QJ25-182/13 | 22 | 30 | 23-27 | 150-210 | 2" | 48.2 |
| 200QJ32-160/10 | 25 | 34 | 29-35 | 136-184 | 3" | 54.5 |
| 200QJ40-182/14 | 37 | 50 | 37-43 | 154-214 | 3" | 79.7 |
| 200QJ50-105/7 | 25 | 34 | 46-54 | 84-126 | 3" | 54.5 |
| 200QJ50-117/9 | 25 | 34 | 46-54 | 94-140 | 3" | 54.5 |
| 200QJ50-120/8 | 30 | 41 | 46-54 | 96-144 | 3" | 65.4 |
| 200QJ50-143/11 | 37 | 50 | 46-54 | 121-165 | 3" | 79.7 |
| 200QJ100-30/2 | 15 | 20 | 80-120 | 26-32 | 4" | 33.9 |
| 250QJ50-200/10 | 45 | 61 | 46-54 | 170-230 | 3" | 94.1 |
| 250QJ50-240/12 | 55 | 75 | 46-54 | 204-276 | 3" | 127.9 |
| 250QJ50-280/14 | 63 | 86 | 46-54 | 268-322 | 3" | 152.3 |
| 250QJ63-100/5 | 30 | 41 | 58-68 | 75-100 | 3" | 64.2 |
| 250QJ63-200/10 | 55 | 75 | 58-68 | 170-230 | 3" | 114.3 |
| 250QJ63-220/11 | 63 | 86 | 58-68 | 180-253 | 3" | 127.9 |
| 250QJ63-260/13 | 75 | 102 | 58-68 | 220-299 | 3" | 152.3 |
| 250QJ63-300/15 | 90 | 122 | 58-68 | 205-343 | 3" | 182.8 |
| 250QJ140-60/4 | 37 | 50 | 130-150 | 52-69 | 5" | 77.8 |
| 250QJ160-30/2 | 22 | 30 | 148-172 | 25-35 | 5" | 47.9 |
| 250QJ160-45/3 | 30 | 41 | 148-172 | 38-51 | 5" | 64.2 |
| 250QJ160-60/4 | 45 | 61 | 148-172 | 52-69 | 5" | 94.1 |
| 250QJ160-75/5 | 55 | 75 | 148-172 | 65-86 | 5" | 114.3 |
| 300QJ200-100/5 | 90 | 122 | 186-214 | 85-115 | 6" | 183.8 |
| 300QJ200-120/6 | 110 | 150 | 186-214 | 100-138 | 6" | 222.1 |
| 300QJ240-22/1 | 22 | 30 | 223-257 | 18-25 | 6" | 249.5 |
| 300QJ240-44/2 | 45 | 61 | 223-257 | 37-51 | 6" | 47.3 |
| 300QJ240-66/3 | 75 | 102 | 223-257 | 56-76 | 6" | 95.4 |
| 300QJ240-88/4 | 100 | 136 | 223-257 | 75-101 | 6" | 154.1 |
| 300QJ400-40/1 | 75 | 102 | 368-432 | 38-42 | 8" | 152.3 |
| 300QJ400-80/2 | 160 | 218 | 368-432 | 76-84 | 8" | 284.4 |
| 300QJ400-120/3 | 220 | 299 | 368-432 | 117-123 | 8" | 439.2 |
| 300QJ500-60/4 | 140 | 190 | 460-540 | 57-63 | 8" | 249.5 |
| 300QJ500-75/5 | 180 | 245 | 460-540 | 72-78 | 8" | 317.5 |
Working conditions of deep well submersible pump:
Three-phase power supply, voltage 380V (error less than 5%), frequency 50Hz (error less than 1%).
Motor must be filled with clean water.
The primary impeller of the pump should be immersed at least 2m under dynamic water level. The pump unit shall be less than 70m deep under static water level. The foot of motor shall be at least 3m above well bottom.
Water temperatureshould not higher than 20 ℃.
Sand content of the water (by quality) not more than 0.01%.
Water PH 6.5~8.5.
The content of hydrogen sulfide in watershould not be more than 1.5 mg/l.
The content of chloridion in water shouldnot be higher than 400mg/l.
The water source must provide enough water for the pump to work continuously.
