Active Member
|
[China]
Address: Zhengzhou
Contact name:Danny
Zhengzhou New Century Digital Technology Co., Ltd. |
|
|
Digital Dye Sublimation Textile Printer With 8 Heads I3200 Industrial Speed Lower Maintenance Cost
Fedar FD6198E Sublimation Textile Printer
| FD6198E Dye Sublimation Printer | ||||
| Printhead | Epson4720 | Nozzle Quantity | 3200 | |
| Printhead Quantity | 8 | Print Width | 1900mm | |
| Ink Color | CMYK | Print Height | 2-5mm | |
| Resolution | 360*1200/360*1800/ 720*1200/720*1800(DPI) | Media Transfer | Auto Media Feeding and Taking-up System, Roll to Roll | |
| Speed *Tested on linear printing without feather function | 2pass | 300㎡/h | Drying Method | Extra Dryer Device |
| 4pass | 200㎡/h | Ink Supply Method | Siphon Positive Pressure Ink Supply | |
| 6pass | 150㎡/h | Head Moisture Method | Auto Head Cleaning and Moisturize | |
| *speed is tested on full-size media without feather function | Print Media | Transfer Paper | ||
| Ink Type | Sublimation Ink, Water based Pigment Ink | Transmission Interface | Gigabit LAN | |
| Computer System | Win7, Win8, Win10 | File Forms | TIFF, JPG, EPS, PDF, etc. | |
| Operate Environment | Temp.:15℃-30℃, Humidity: 35℃-65℃ | RIP Software | NeoStanpa,Ergosoft, Onyx,Photoprint,Maintop | |
| Package Size | 3900*1340*1920mm | Power Supply | 210-230V, 50/60HZ, 16A Print Power: 1500W Dryer Power: Max.9000W | |
| Computer Configuration | Hard Disk: NTFS, C Disk Space: More than 100G, HARD Disk:WG500G
GPU: ATI Discrete GPU, CPU: Inte I5/I7, Gigabit LAN | |||
| Standard Configuration | Ink Level Alarm System | |||
Which Printhead Can Used in This Model?
Original I3200-A1(mainly used in dye textile market)
Why I3200-A1 head speed is better than 5113 in Dye Sublimation Printer?
1. Epson I3200-A1 head has 8*400=3200 nozzles which is same as
5113, but head quality is better than 5113, it has seperate inkfill
and connect damper directly.
Nozzle is more, some time which can print more ink, so speed is
faster.
2. Printhead Ignition frequency: I3200 A1 --16.7K, Epson
5113---14.4K
Printhead ignition frequency is single nozzle print times in one
second, ignition frequency is higher, print speed will faster,
I3200 support print big, middle and big dot print, then this new
head print quality is more higher.
3. Printhead nozzle dot: I3200 A1 ---3.8pl-6pl-12pl, Epson
5113---3.5pl-6pl-12pl
Little dot can print some detail or smaller picture, which will
show best print qaulity, but if only use little dot print, print
speed will slow even ignition frequency is higher. So most people
will use 3 dots to print model, keep the print quality and let
print faster. In this condition, 5113 and I3200 no much
distance.
Features
1. New design for 8 heads capping station, this printhead sequence can printing 2pass, and eliminate the banding during high speed print.
2. Add the light beside capping station, it is more better to do the calibation and check printhead surface status.
3. Industrial aluminum beam with 2pcs THK guide rail which can ensure high speed stability.
4. Intelligent pinch roller, you can let single roller work or close depend on your print inquiry.
5. Install advanced anti-collision system on carriage, avid the printhead damage from sharp products on platform during print.
6. All machine little doors with hydraulic rod, it will be better to open and close it.
7. With industrial level taking-up media motor and feeding media motor, support 2000m transfer paper working.
8. Configurate with 3L big ink tank and has lack ink alarm system, which can let one staff working for more than 10 sets in same time.
Application for Fedar FD6198E
Dye Sublimation Textile Printer can support print different gsm transfer paper, 45 to 100 gsm, and transfer on polyester(contton<30%)
Sportswear, curtain, dress, shoes, carpet, silk, bed sheet, etc.
