ASTM SB163 UNS N04400 MONEL 400 FINNED TUBE, NICKEL ALLOY TUBE FOR HEATING
YUHONG GROUP deal with Stainless/Duplex/ Nickel steel seamless pipe and tube
already more than 10 years, every year sell more than 80000 tons of Stainless/Duplex/ Nickel steel seamless pipe and tube. Our client already cover more than 45
countries. Our stainless steel seamless pipe and tube was width
used in Mining, Energy, Petrochemical, Chemical Industry, Food
plant, Paper plant, Gas and Fluid Industry etc. ANSI B16.10: B16.19
SCH 5S, SCH 10S, SCH 20, SCH 30, SCH 40S, SCH 60, SCH80S, XS, SCH
100, SCH 120, SCH160, XXS
Monel 400®, Nickelvac® 400, Nicorros® 400
Monel 400 is a combination of nickel and copper and is hardened by
cold working only. This alloy is widely renowned for for its
corrosion resistant properties against flowing sea - water and is
extensively used for marine applications. Monel is also extremely
resistant to stress corrosion cracking in most freshwaters. High
temperature ( up to 1000 °F) has no effect on this alloy and it
also has excellent mechanical properties at subzero temperatures.
Monel 400 is available in many forms like wire , Round bar, Forged
bar , hex bar , Flat bar , Circles , Ring , Tube , seamless Pipe ,
Welded / ERW Pipe , Sheet , Plate , Coil , Flanges , fasteners ,
Socket weld Fittings , ferrule fittings , Buttweld fittings Like
cap , elbow , tee. UNS N04400 is available in various forms like
Monel 400 wire , Monel 400 Round bar, Monel 400 Forged bar , Monel
400 hex bar , Monel 400 Flat bar , Monel 400 Circles , Monel 400
Ring , Monel 400 Tube , Monel 400 seamless Pipe , Monel 400 Welded
/ ERW Pipe , Monel 400 Sheet , Monel 400 Plate , Monel 400 Coil ,
Monel 400 Flanges , Monel 400 fasteners , Monel 400 Socket weld
Fittings , Monel 400 ferrule fittings , Monel 400 Buttweld fittings
Like cap , elbow , tee , Reducer.
UNS N04400 is available in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer,
round bar, seamless pipes, sheet, tee and tube.
Chemical Analysis of ALLOY 400 (UNS N04400)
Monel 400®, Nickelvac® 400, Nicorros® 400
C | MN | P | S | Si | Cr | Ni | M | Cu | Cb +Ta | Al | Fe | other |
.25max | 1.5 max | | . 01 max | .5 max | | 63.0 min | | 27-33 | | 2.30- 3.15 | 2.5 max | |
Specifications
Monel 400 Sheet / Plate | Monel 400 Round Bar | Monel 400 Pipe | Monel 400 Tube | Monel 400 Fittings | Monel 400 Forgings |
QQ N 286 | ASME SB-865 AMS 4676 QQ N 286 | | | | QQ N 286 AMS 4676 |
For a given tube or size, the required heat transfer can be
obtained by specifying the appropriate fin length and fin thickness
and/or the number of fin tubes per meter length.
HFW Solid Finned Tube
This welded steel finned tube configuration can be used for any
practically heat exchanger application, and is particularly suited
to high temperature and high pressure applications. The important
features of this configuration are efficient, effective bond of fin
to tube under all conditions of temperature and pressure, and
ability to withstand high fin-side temperatures.
A continuous helical fin is attached to the base tube by high
frequency electric resistance welding in order to give an efficient
and thermally reliable bond.
Technical Details/Base Tube Details
Tube Diameter : 20 mm OD Min to 219 mm OD Max.
Tube Thickness : Minimum 2 mm up to 16mm
Tube Material : Carbon Steel, Stainless Steel, Alloy Steel, Corten
steel, duplex Steel, Super Duplex Steel, Inconel, High Chrome High
Nickle & Incolloy, CK 20 material and some other material.
Fin Details
Fins Thickness : Min. 0.8 mm to Max. 4 mm
Fins Height : Min 0.25” (6.35 mm) To Max.1.5” (38 mm)
Fin Density : Min 43 Fins Per Meter To Max. 287 Fins Per Meter
Material : Carbon Steel, Stainless Steel, Alloy Steel, Corten
steel, Duplex Steel and Incolloy.
For a rapid quotation, plz send with following requirement:
Number of pieces,
base tube: Diameter, thickness, length and material specification.
Fins: material specification, type (solid or serrated), height,
thickness, spacing, finned length and unfinned sections. Weld prep
details if required.
Delivery period required.
Keywords: Fin tubes, Finned tube, Finned Pipe Helical Finned Tubes,
Solid fin tubes, Serrated finned tube, Helical Serrated Finned
Tubes, Tubos Aletados
* These are the most common fin/tube patterns. We have more than 20
different plate fin and tube combinations. Contact me for more
information and options. |
Helical Fin Surface (Tube OD – Available Helical Fin Height on the Tube) |
5/8″ – 3/8″, 1/2″ and 7/16″ | 1″ – 3/8″, 1/2″ , 7/16″ and 5/8″ | 1 1/4″ – 3/8″, 1/2″ , 7/16″ and 5/8″ |
15.875mm – 9.525mm, 12.7mm and 11.113mm | 25.4mm – 9.525mm, 12.7mm, 11.113mm and 15.875mm | 31.75mm – 9.525mm, 12.7mm, 11.113mm, and 15.875mm |
- “L” Footed, Embedded and other helical fin attachment options are
available.
- Contact me about the availability of 1
|