|
[China]
Trade Verify
Address: Room 1002 A Building XuHong Mansion NO.3 Beijing Road Cangzhou City Hebei Province China
Contact name:Arno Hao
Cangzhou Best Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
Door frame roll forming machine technical parameters
| |
| Raw Material | Hot rolled and cold rolled steel |
| Thickness | 1.2 – 1.5 mm |
| Yield Strength | 235 Mpa |
| Power Source | 380 V±10%, 50-60Hz (according to buyer’s request) |
| Air Pressure Request | > 0.5 Mpa |
| Roll Forming Speed | 30 M/minute (including cutting time) |
Decoiling → Leveling → Servo Feeding → Multistation Punching Machine → Roll Forming → Flying Cutting → Plate to Support Table
Door frame roll forming machine components
| ||
| NO. | Name of Component | Quantity |
| 1 | Decoiler | 1 set |
| 2 | Leveling Device | 1 set |
| 3 | Loop Device | 1 set |
| 4 | Servo Feeding Device | 1 set |
| 5 | Multistation Punching Device | 1 set |
| 6 | Roll Former | 2 sets |
| 7 | Flying Cutting Device | 1 set |
| 8 | Support Table | 1 set |
| 9 | Hydraulic System | 1 set |
| 10 | Electric Control System | 1 set |
