Active Member
|
[China]
Address: Room 1002 A Building XuHong Mansion NO.3 Beijing Road Cangzhou City Hebei Province China
Contact name:Arno Hao
Cangzhou Best Machinery Co., Ltd |
|
|
5.5 kw Servo Motor Glazed Tile Roll Forming Machine High speed 4 m/min
1. Details of glazed tile roll forming machine
| Material |
| Material Thickness(&):0.4-0.8mm |
| Applicable material: Galvanized Steel Coils, Cold Rolled Coils, yield strength 345Mpa |
| Machine Components |
| 1)Manual Decoiler: one set |
| Max. feeding width: 1250mm, coil ID range 470mm±30mm |
Capacity: Max. 5Ton |
| 2) Cold Rolling Mills: |
Rollers manufactured from first grade-45# steel, precision machined, hard Chrome Coated with thickness 0.04mm(for longer life and anti-rust) ; |
| Motor Driving, Gear chain transmission, 18 forming stations. |
| Main Motor=5.5KW, Frequency speed control |
| Forming speed of approx.5-8m/min |
| 3) Hydraulic Cutting device |
| hydraulic motor: 5.5KW, Hydraulic pressure range: 0-12Mpa |
| Cutting tool material: Cr12Mov, Heat treatment |
| 4) PLC Control System(Touch screen brand: Taiwan WEINVIEW, Inverter brand: Finland VOCAN/Denmark Danfoss, Encoder brand: Japan Koyo) |
| Control the quantity and cutting length automatically |
| Combined with: PLC, Inverter, Touch Screen, Encoder, etc |
| Cut-to-length tolerance≤±1mm |
| Control Voltage 24V |
| 5) Exit Rack Un-powered, two units |
| Material | color coils and galvanized coil | |
| Width of the material | 100mm | |
| Machine sizes | 7760 x 2000 x1500mm | |
| Motor | 4 + 4 kw | 5.5 kw Servo Motor |
| weight | 7.2 ton |
1.Main Accessories:
| 1 | Decoiler(manual or hydraulic for options) | 1 set |
| 2 | Feeding device | 1 set |
| 3 | Main Forming Machine | 1 set |
| 4 | Hydraulic step press device | 1 set |
| 5 | Hydraulic cutting device | 1 set |
| 6 | Hydraulic Station | 1 set |
| 7 | PLC computer control system | 1 set |
| 8 | 2m Run Out Table(auto stacker for options) | 2 sets |
2.Main Technicial Parameter:
| 1 | Inner diameter of manual decoiler | 500mm |
| 2 | Outer diameter of manual decoiler | 1200mm |
| 3 | Weight capacity of manual decoiler | 5T |
| 4 | Appearance Size | 10000mm*1350mm*1510mm |
| 5 | Raw Material | colored steel or galvanized steel |
| 6 | Roller material | high grade 45# forged steel,polished,heated,quenched |
| 7 | Blade Material | CR12 with polished,heated and quenched HRC60-62 |
| 8 | Chrome Coating | coated with 0.05mm hard chrome |
| 9 | Control System | PLC control |
| 10 | Main Motor Power | 5.5 KW |
| 11 | Hydraulic Power | 4 KW |
| 12 | Roller station | 16 rollers |
| 13 | Material of chain | high grade 45# steel:polished,heated,quenched HRC 45-50 |
| 14 | Speed of Product | 3-4m/min |
| 15 | Thickness range | 0.3-0.6mm |
| 16 | Type of cutting | hydraulic cutting |
| 17 | Coil Width | 914mm(max1250mm,or as your requirement) |
| 18 | Cover Width | 800mm(or as your requirement) |
| 19 | Material of rack | complete welded structure of A3 steel plate |
| 20 | Machine frame stand | welded with 36# I-steel |
| 21 | Type of forming machine | single station with chain transmission |
| 22 | Thickness of frame | 18mm |
| 23 | Shaft Diameter | 80mm |
| 24 | Weight | about 8T |
| 25 | Voltage | 380V 50HZ 3Phases( or as your local requirement) |
| 26 | Electrical control | PLC frequency control system with touch screen in English |
3. Work flowing:
Decoiling -- Feeding guide -- Roll forming -- Press step -- Hydraulic cutting -- Running out
4. Payment Term and Condition:
| 1 | Payment Term | 30% T/T in advance, 70% T/T before shipment |
| 2 | Delivery Time | Within 45 Working Days after receipt of the down payment |
| 3 | Warranty | 1 year and life-long maintenance |
| 4 | Installation and commissioning | Our engineer will go to make installation there,buyer pay our engineer 100USD/day,and provide accommodation,visa and the round-trip ticket fee |
5. Use:
| 1 | It is widely used in load bearing roof and buttree of large and medium-size industrial and civilian buildings |
| 2 | Like factory,workshop,garage, warehouse, locomotive shed, hanger, exhibition building, cinema, theatre, stadium, garden etc |
| 3 | They are widely used as the supporter of roof and wall in large-scale and mid-scale construction |
Product Description
The machine adopts hydraulic guide column to cut off, making the machine shape more beautiful, the dual cylinder drive cutting is not easy to deform,
The hydraulic system is equipped with a pump station, and the power of the oil pump station is 3kw, which is not distorted or wasted, and the safety factor is high.
This machine adopts PLC control system, the language is Chinese and English, if the customer has special request can set the corresponding language according to the customer's requirement.Adopt Taiwan in the brand, the screen has two kinds of touch screen and buttons, quality control system, containing counter and form switch, like the human brain, accurate control and cut off the customer the required length and quantity.
