|
[China]
Trade Verify
Address: Room 1002 A Building XuHong Mansion NO.3 Beijing Road Cangzhou City Hebei Province China
Contact name:Arno Hao
Cangzhou Best Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
Light Steel Keel Tee Bar T-Grid Ceiling Roll Forming Machine Manufacturer
| PRODUCT FEATURES |
1. Touch screen control equipment, easy to use 2. The surface finish of the production profile is good. The galvanized plate does not hurt the zinc, the color coat does not drop the paint, and the shape can be highly matched the design drawing at 1:1. 3. Mechanical equipment are sturdy and durable, less failure, and low maintenance costs. 4. Low waste rate of profile production, Save production cost. |
| BRIEF INTRODUCTION |
This equipment is used for producing door frame, window rail support, storage rack, drawer slider, light steel keel, pipe,highway guardrail and so on. The whole production line consists of a material-putting rack, forming main machine and hydraulic set-length punching-cutting machine. Its shearing involves no waste,not producing shearing waste and saving the cost of material,with high production efficiency. |
Main T: equiped with inverter motor, producing in line speed: 30M per minute. Hydraulic automatic punching and cutting machine linked withmain forming machine,punching and cutting automatically. Two heads and middle holes are punched and cut-off at the same time after forming.
Cross T: equiped with both inverter and servo motor producing in line speed: 30M per minute. Main machine with constant speed,it is tracedby the servo trace system, automatic tracing the speed of the main machine, punching and cutting automatically. Two heads and middle holeare punched and cut-off at the same time after forming.
Specifications:
| Manual decoiler | 1).Material coil inner diameter: 450mm-550mm 2).Max coil width:300mm 3).Carrying capacity: 1.5T |
| Forming device | 1)Shaft material:high grade No.45 steel after treatment 2)Out diameter is 50 mm 3)Roller material: Cr12 polished and coated with chrome HRC55-60° 4)Forming speed:30m/min 5)Main motor power:5.5 kw 6)Roller station:10-12stations 7)Voltage:380v,50Hz,3 phase 8)Main frame structure: memorial arch structure 9)Control device:automatic cumputer control ,by PLC,operate easily 10)Cutting device: hydraulic tracking cutting(you can also request to add a servomotor, the production speed can be reached 40-60m/min) 11)Transmission: gear drive |
| Hydraulic cutter | 1). material of blade: Cr12 mould steel with quenched treatment 55-60°C 2). cutting system: adopt advanced hydraulic drive, after forming automatic cut, no distort, no wasting , high safe factor.(main motor stop cutting) |
| Control system | Type: PLC Frequency Control System with touch screen Length Error: ±2mm (about the electrical apparatus element ,customers also can specify the brand) |
| Outpur table | It is simple and used to load finished product. Length:6m |
Components:
| NO | Name | Unit | Qty | |
| 1 | Man-made decoiler | set | 2 |
|
| 2 | Feeding Table | set | 1 | |
| 3. | Forming Rollers | set | 1 |
|
| 4. | Hydraulic cutting with hole punching | set | 1 |
|
| 5. | Profile Discharger | set | 1 |
|
| 6. | Electric Control system | set | 1 |
Brake down and so on (6)Power supplier 380V 50Hz 3phase |
Why choose us?
1.We can make and design all kinds of roll forming machine
according to customer’s requests.
2.This is a very perfect and durable equipment. We have more than 20 years experiences.
3.This kind of machine has the best quality and the best price. It
has accurate measurement and easy operating.
4.We can design and manufacture the special type machine according
to the customers’ requirement and we could provide technical
guiding, production, installation, debugging and maintenance
service to all customers.
5. Our product has been exported to many regions and won high
reputation because of the high quality and reasonable price.
Please inquiry me, get more details and full machine video.
