(2) Main machine system | ①Roll forming system | - Roll forming system consists of machine frame, drive disk assembly
and cold bending rollers, ect.
- The machine Section production and then splicing it
- Cr12 Heat Treatment,roller surfaces polishing, hard plating .
- Support structure in the form of roller shaft.
- All motors use dedicated motor, has excellent mechanical
properties.
- Powered by a hydraulic motor system, it has small machine noise,
and stable speed rapid prototyping.
|
| ②System for forming after cutting off | - Adopting rolling forming then cut the sheet. No waste here, Cutting
knife is made of the Cr12 after quenching.
- Using combined frame type to cut the machine frame. The
characteristics is good maintainability and easy to adjust.
- Hydraulic stations offer the cutting power.
|
| ③Structural features | - Material of rollers:45# steel,roller surfaces polishing, hard
plating , The polished surface and the heat treatment towards the
molds also can keep the molding plate surface smooth and not easy
to be marked when it is being stamped.
- Cut-off tool: Use of high strength wear thicker type mold, it is
advantageous to avoid cutting off at deformation.
|