|
[China]
Trade Verify
Address: Room 1002 A Building XuHong Mansion NO.3 Beijing Road Cangzhou City Hebei Province China
Contact name:Arno Hao
Cangzhou Best Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
PLC Control Steel Stud Roll Forming Machine For Making Aluminum Metal Ridge Cap
What does this machine include?
1). 3T manual decoiler
2). Feeding →roll forming→pressing→hydraulic cutting
3). Output table
4). Control panel
5). Hydraulic station
6). Spare part list
Parameter of ridge cap machine
| Profile steel thickness between 0.3mm and 0.7mm | |
| Main motor power | 4kw, AC motor, side motor to save space |
| Machine Voltage, Frequency, Phase | 380 V, 50 Hz, 3Phase |
| Roll station | 14 station of rollers |
| Roller material | SAE1045, chrome plated surface |
| Shaft diameter | 70mm |
| Working type | up shaft is initiative, down shaft is passive |
| Machine roll forming speed | 3m/min |
| Roll former has leveling bolts in the base for adjust the leveling | |
| Machine base frame adopt H beam welding steel | |
| Transmission | by chain, 1.0inch double line |
| Color of machine | Blue and yellow, or as per required |
Professional Metal Roof Ridge Cap Roll Forming Machine Made In China parameters
Manual Un-coiler | ◊ Max Capacity: 5000kgs ◊ Inner diameter of coil: 400-600mm ◊ Manual with brake |
Leveling Device | ◊ Ensure the material level and straight ◊ The width can be adjusted |
Main Forming System | ◊ Width & Height & Thickness of sheet: According to
Drawings ◊ Material: GI sheet coil or Colored sheet coil ◊ Motor Power: 5.5 kw forming system ◊ Roller material:Cr12. ◊ Surface of Roller: Heat treatment HRC58-60. ◊ Diameter of main shaft: 60mm #45 steel, heat treat modulation ◊ Forming station: 12 stations. ◊ Transmission: by chain and gear ◊ Measuring accuracy: +/- 0.5 mm/M. ◊ Safety Hood: Cage ◊ Arch middle plate: 30mm thickness. ◊ Output: 8-10 Tons per shift (8 hrs.). ◊ The machine base is assembled and welded by high quality steel. |
Hydraulic Cutting Device | ◊ Cutting way: Tracking (Flying).. ◊ Oil pump station: 1set ◊ Motor power of Oil pump station: 7.5kw with cooling system. ◊ Forced air cooling device available. ◊ Cutting mould: 1 sets. ◊ Material of blade: CR12 with heat treatment HRC60-62. |
Electrical System | ◊ Control system: HMI & PLC control panel. ◊ Power: 440V 50Hz (as per local requirement) |
Run-out Table | ◊ Frame: 8# steel groove welded ◊ Roller type. ◊ Quantity: 1 pc |
machine picture
