|
[China]
Trade Verify
Address: Room 1002 A Building XuHong Mansion NO.3 Beijing Road Cangzhou City Hebei Province China
Contact name:Arno Hao
Cangzhou Best Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
2 / 3 Beam Exprpessway Rail Guardrail Forming Machine 3mm - 5mm Galavnized
Working flow
Decoiler-----feeding----- leveling ------roll forming ------
punching-----cutting----output table
Machine Component
| De-coiler | 1 set |
| Leveling device | 1 set |
| Forming machine | 1 set |
| punching device | 1 set |
| Cutting device | 1 set |
| PLC control box | 1 set |
| Hydraulic pump station | 1 set |
| Production support table | 1 se |
Technial Specification
| No | Technical Specification | |
| 1 | Manual Uncoiler | Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:1.2T,Inner diameter: 500-508mm |
| 2 | Feeding Table | Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron. |
| 3 | Main Roll Forming Machine | Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped |
| 4 | Hydraulic System Computer Control Cabinet | Power:5.5kw,Hydraulic oil: 40# hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use PLC:EURA |
| 5 | Shearing Mechanism | It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12,quenching treatment |
| 6 | Output Table
| It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products. |
Technical Parameters
1. Decoiler: umbrella type, passivity decoil, manual expansion
2. Decoiler capacity: 5T
3. Material width and thickness: 480mm*(2.0-3.2mm), Q235A steel
4. Working speed: 15M/min
5. Forming stand: 15 station and 7 leveling rollers
6. Roller material:GCr15 bearing steel with quenching treatment, HRC58-62
7. Main shaft material: high grade No.45 steel by thermal refining
8. Main shaft diameter: φ95mm
9. Main motor power: 22kW
10. Transmission: Chain
11. Leveling motor power: 5.5kW
12. Hydraulic motor power: 11kW with accumulator
13. Punching and cutting type: hydraulic transmission, pre-punching, cutting after forming
14. Punching and cutting mould: Cr12 with quenching treatment, HRC58-60
15. Outside size of machine: 16000x2700x1700
16. Hydraulic station pressure: 10~12 Mpa
17. Control system: the production line adopts industry computer PLC frequency converting controller, the length tolerance ≤2m
18. transducer: Mitsubishi
19. PLC: Mitsubishi FX-IS series
Processing Flow
Machine Photos
Contact Information
Abby Song
WhatsApp/Wechat:0086-18701854523
Email:Sales2@chbestmachine.com
