|
[China]
Trade Verify
Address: Room 1002 A Building XuHong Mansion NO.3 Beijing Road Cangzhou City Hebei Province China
Contact name:Arno Hao
Cangzhou Best Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
1.2mm Metal Roller Shutter Slat Garage Door Roll Forming Machine Supplier
Brief introduction
This equipment is used for producing roller shutter door. The whole production line consists of a material-putting rack,forming main machine and hydraulic set-length punching-cutting machine. Its shearing involves no waste,not producing shearing waste and saving the cost of material,with high production efficiency.
Metal Garage Steel Roller Shutter Door Profile Roll Forming Making Machine with Embossing Design can make various types metal roller shutter door, reinforced, fire stop doors, etc by roll forming method. The steel roller shutter door roll forming machine is a complete product line. After roll forming by our production line, we could make very smooth and beautiful roller shutter door without any scratch on surface. This roller shutter door production line is composed by the following elements: De-coiler, feed & leveling device, main roll forming machine, hydraulic cutting system, PLC control system, run-out table, etc. The machine will be customized according to your profile drawing.
Technical Parameters
| Productivity | shutter as the drawing |
| Material specification | Aluminum, galvalume, galvanized and pre-painted galvanized steel. |
| Thickness | 0.7 mm to 1.2mm. |
| Main motor power3 | kw. |
| Hydraulic station power | 3 kw. |
| Feeding width | Depends on the model of profile. |
| Yield stress | 235Mpa(33KSI) ~ 350Mpa |
| Roll forming Speed | 12-15 m/minute. |
| Cutting Tolerance | +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm) |
| Manual Uncoiler | Max. Capacity: 3000kgs |
| Coil inner diameter | 508mm/610mm. |
| Voltage | 380v/50hz/3 phase |
| Numbers of stands | 12 stands/stations/pairs for each roll forming system |
| Roller Material | High grade No.45 forged steel, coated with hard chrome. |
| Active Shaft Material | High grade No.45 carbon wrought steel,which can improve the integrated mechanic feature of the shaft. |
| Electric Elements | PLC control panel, transducer imported from Mitsubishi of Japan. Other elements are from famous suppliers of China |
| Cutter blades | Cr12 mould steel with quenched treatment. |
Our service:
Best service:
Working Flow:
Manual decoiling----feeding and guiding----roll forming----punching----cut to length----run out table
Q:How is this machine's service life?
A:In the normal maintenance,the service life at least 8 years.
Q:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two
ends of the shaft every month,
replace the hydraulic oil every 1-2 years.
Q:What can you do if the machine broken?
A:Our machine's warranty period is 1 year,if the broken parts can't
repair,
we can free send the new parts replace the broken parts to you except the solenoid valve,the solenoid valve you must pay the express cost yourself.
if after warranty period,we can through negotiationfor to solve the
problems,and we supply the technical support for the whole life of
the equipment.
Q:Can you be responsible for transport?
A:Yes,please tell me the destination port or address.
we have rich experience in transport.
Q:Can you make the machine according to my design or proto type?
A: Yes. We have an experienced team for working out the most
suitable design and production plan for the machine that you are
going to book with us.
Q:How many workers operate this machine to manufacture?
A:Only 1-2 worker.
Q:Can you supply the raw materials?
A:Yes,we can supply the galvanized steel coil,galvalume steel
coil,color steel coil,and aluminum coil.
Need my help now?I am always here for you
Please contact us now!
Machine photos:
