Galvanizned Steel Euro Style Roller Shutter Door Frame Roll Forming Machine 0.8-1.2mm Thickness

                Galvanizned Steel Euro Style Roller Shutter Door Frame Roll Forming Machine
 
1.Technical Parameter
A. Manual Decoiler
(1) Max Width: 1250mm
(2) Inner Diameter: 500mm
(3) Outer Diameter: 1200mm
(4) Max Weight Capacity: 5T
 
B. Roll Forming
(1) Raw Material: Colored steel or galvanized steel
(2) Material Thickness: 0.8-2.2mm
(3) Working Speed: 8-12m/min
(4) Rollers: 11 rollers ( based on drawing )
(5) Material for Rollers: GCr15, polished, heated, quenched HRC55-60°
(6) Motor Power: 3KW
(7) Roller Diameter: 70mm
(8) Machine Side Plate Type: Guide Pin Type
(9) Transmission Type: Chain Transmission
 
C. Hydraulic Cutting
(1) Cutting Type: Hydraulic, automatic cutting
(2) Blade Material: Cr12 with polished, heated, quenched HRC 60-62
(3) Power: 3KW
 
D. Control System
(1) Electrical Control: PLC Frequency Control System with touch screen
(2) Voltage: 380V/3Ph/50Hz(or as your local standard)
(3) Length Error: ±1mm
 
E. Output Table
(1) It is simple and used to load finished product
(2) Length: 4m 
 
2.Main components

 
3. Profilr Drawing for Reference:


 
4. Our advantage:
- Metal Steel sheet Shutter Door Gate Frame Roll Shaping Machine consist of one set decoiler, one sets of feeding platforms and one roll forming core,and one cutting dies.
- Metal Steel sheet Shutter Door Gate Frame Roll Shaping Machine size we can design the machine all as customize,customer just show us the profile drawing material thickness width, we can design the machine according as the request
- When we finish Metal Steel sheet Shutter Door Gate Frame Roll Shaping Machine, we will test the machine and adjust the machine many times to be sure the machine have a perfect status and when customer receive the machine, the machine can be used very easy
 
5.Our service:

a.If buyers visit our factory and check the machine, we will teach you how to install and use the machine, and also train your workers/technician face to face.
b.Without visiting, we will send you user manual to teach you to install and operate.
c.If buyer needs our technician to go to your local factory, please arrange board and lodging and other necessary things.
2. After Service of roof forming machine:
a.One year guarantee for whole roof forming machine.
b.24 hours technical support by email or calling
c.If there is any problem found of the roof forming machine, we will repair it for free in one year.
 
6.Company information:
Cangzhou Best Machinery Manufacturing co., LTD is specialized in the manufacture of high-end equipment cold bending forming equipment manufacturer,has a professional engineer for technical guidance.Engineers engaged in cold bending mechanical equipment design for more than 20 years,has a wealth of design concept.Can provide users with a special type of design and manufacture.At the same time to sell equipment for installation,guidance,production,commissioning one-stop service.