|
[China]
Trade Verify
Address: Room 1002 A Building XuHong Mansion NO.3 Beijing Road Cangzhou City Hebei Province China
Contact name:Arno Hao
Cangzhou Best Machinery Co., Ltd |
|
Verified Suppliers
|
|
|
Half Round Water down Gutter Profile Cold Roll Forming Machine
Application
The roll formed product is mor durable than the tranditional ppc
pipe, and not easy to aging.
It will make the project more integrate, and help enhancing the
image of all project.
Drainpipe bending machine used for bend the roll formed pipe, to
connect the drainpipe and the elbowed pipe.
Working flow
Decoiler----feeding----roll forming----cut to length----output
table
Machine components
| Name | Qty. |
| Decoiler | 1set |
| Forming machine | 1set |
| Cutting device | 1set |
| Hydraulic pump | 1set |
| Output table | 1set |
Parameter
1. Suitable to process: Color steel plate
2. Width of the plate: 470mm
3. Rollers:18stations
4. Material thickness:0.3-0.8mm
5. Power: 4+4kw
6. Bottom frame: 360H steel
7. Diameter of the roller:Φ70mm
8. Weight: About 6.8T
9. Voltage: 380V 50Hz 3phases
10. Hydraulic: 40#
11. Processing precision: Within 1.00mm
12. Control system: PLC control
Manual Uncoiler
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:3000KG.Inner diameter: 500-508mm
Main Roll Forming Machine
Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.
Hydraulic System AND Computer Control Cabinet
Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the
cutter machine to begin the cutting job.
The target piece`s length is adjustable and digit of it can be
adjusted. Computed mode has two modes: automatic and manual one.
The system is easy to operate and use
PLC: EURA(Can customize as customer require)
Shearing Mechanism
It adopts the hydraulic drive and automatic location to decide the
dimension and cut the target products.
Material of blades: Cr12,quenching treatment
Output Table
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products.
| Working conditions | |
| 1.working size | 15m x 2m x 4m |
| 2.Power supply | 6kw |
| 3.Frequency | 50-60HZ |
| 4.Wires/cables | 4-6mm²(length according to workshop) |
| 5. Labor cost | 2 workers |
| 6. Tools | Spanners and screwdriver |
| 7.Lift device | 3-5t forklift or crane |
RFQ
Step 1: Tell us your requirements
Step 2: Quoataion will be sent based on your requirement. Solution
will be recommended to you as the alternative
Step 3: Negotiate and confrim each details for goods, trading terms
and so on, get agreement and sign contract.
Step 4: Advanced payment and production
Step 5: Factory Examine Goods/ rectify and reform to meet the
requirements of contract.
Step 6: Balance payment and shipping
Step 7: Handing Shipping files to help clients get goods from
transporter in time.
Step 8: Clients get goods and go into warranty time.
