Color Customized Chain Drive Economic Cable Tray Roll Forming Machine Hydraulic Punching

1-2mm Galvanized Steel Chain Drive Economic Cable Tray Roll Forming Machine Hydraulic Punching ​
 
 

Description:

A cable tray system, is "a unit or assembly of units or sections and associated fittings forming a rigid

structural system used to securely fasten or support cables and raceways." Cable trays are used to hold

up and distribute cables. Cable tray roll forming machine is special designed for its production.

Specifications of cable tray machine :
 

Machine Components: 

1 Drive decoiler

Material width:1000mm

Material weight:5000kg

Material inner diameter:460-510mm

Material outer diameter:1500mm

Drive power: electromotor and speed reducer integration, 4kw frequency conversion electromotor

Frame type: cantalever inner support, manual handle afterbody, pneumatic press cantalever.

2 Flatting

Working rolls: 11 rolls, up 4/down 5, the residual 2 rolls is clamp deliver rolls.

Flatting bound: material thickness 12mm, material width 100-860mm

Drive power: 5.5kw frequency conversion electromotor

Speed reducer model: ZQ250

flatting speed:310 m/min

Parenthesis up and down a pair of fortified wheel

3 Continual punching mould

Amount: Each kind of width specification 1 set dies, total 6 sets

Die require: Cr12 quenching

4 Servo feeding set

Servo electromotor power: 4kw

Multistage type feeding, memory ten group of memory functions

Man-machine contact surface numerical control system

Uses Mitsubishi servometer

5 Holds material (use in cushion section)

The roller type, the both sides have the bearing support, 3 sets, use in holding the material and under the deposited material spacing.

6 Guider

A pair of horizontal roller and two pairs of vertical guide rolls, total 1 sets.

7 Main roll forming machine

forming frame: 16 sets

Forming variety: bridge frame

material max width:600mm

material max thickness:≤2.0mm

forming width: 100-600mm

forming height: 50-200mm

The diameter of the roller axis: 85mm

Roll mould material: Gcr15,quenching treatment:HRC58-62°

Drive type:30kw frequency conversion electromotor, ZQ500 Main speed reducer

Autocephaly distribute gear case

8. Hydraulic cutting

Hydraulic pumping station: 5.5kw

blade cuttimg, blade material Cr12, quenching treatment

 Working Flow of Roll Forming Machine

Uncoiler—Feeding—Leveling—Punching&Cutting—Roll forming—Output table
 
 

 
Profile drawing of cable tray
 


Pictures

Customer Survice

1. Installation and training of light keel making machine:
a.If buyers visit our factory and check the machine, we will teach you how to install and use the machine,
and also train your workers/technician face to face.
b.Without visiting, we will send you user manual and video to teach you to install and operate.
C.If buyer needs our technician to go to your local factory, please arrange board and lodging and other
necessary things.
 

2. After Service of light keel making machine
a.One year guarantee for whole machine.
b.24 hours technical support by email or calling
c.If there is any problem found of light keel making machine, we will repair it for free in one year.