Home Companies Hebei Kaiheng wire mesh products Co., Ltd

T1 Welded Fixing Steel Grate Stair Treads Ladder 40mm Bearing Bars Pitch

Hebei Kaiheng wire mesh products Co., Ltd
Active Member

Contact Us

[China] country

Address: Anping County, Hengshui, Hebei, China wire mesh Old Industrial Park

Contact name:Wang

Inquir Now

Hebei Kaiheng wire mesh products Co., Ltd

T1 Welded Fixing Steel Grate Stair Treads Ladder 40mm Bearing Bars Pitch

Country/Region china
City & Province hengshui hebei
Categories Metal Building Materials
InquireNow

Product Details

T1 Welded Fixing Without Nosing Stair Tread For Steel Ladder 40mm Bearing Bars Pitch


Introduction to technical parameters of step plate grating


The steel grating of this model adopts the welding fixed installation method. The center distance of the load flat steel is 0mm. For the flat steel with this center distance, the recommended step plate width is 125, 165, 205, 245, 285 and 325 mm, and the center distance of the cross bar is 10cm. According to the cross-sectional area of the flat steel, the recommended step plate length rules are as follows:
If the load flat steel section of the step plate is 25mm * 3mm, the recommended step plate length is 550mm;
If the load flat steel section of the step plate is 25mm * 5mm, the recommended step plate length is 900mm;
If the load flat steel section of the step plate is 32mm * 5mm, the recommended step plate length is 1300mm;
If the load flat steel section of the step plate is 40mm * 5mm, the recommended step plate length is 1600mm;


The allowable error of tread plate width is: - 3mm to 3mm, and the allowable error of length is 0-3mm

Attribute table of steel ladder step plate with 40mm spacing between flat steel without front guard plate fixed by T1 welding

nameT1 bearing bar pitch 40mm stair tread
colorsilver white
materialcarbon steel Q235 and zinc
surfacehot dip galvanizing
bearing bar pitch(mm)40mm
recommended width(mm)125,165,205,245,285,325
bearing bar(mm)25*3,25*5,32*5,40*5
Maximum length(mm)450,750,1200,1500
cross bar pitch(mm)100
performanceGood bearing capacity, corrosion resistance, ventilation and light transmission
standardiso9001:2015


Main performance of steel ladder step plate grating


The installation of the step board is very simple. The welded fixed interface is directly adopted. It is required to have good lighting performance in the plant. The step board designed by this grid has very good ventilation and light transmission effect, high strength, light structure, corrosion resistance, no accumulation of rain and snow, durability and no enclosure. It has impact resistance and good compression resistance in the plant.


The main application scenarios of step steel grating are as follows


Treads are widely used in power plants, water plants and other factories, as well as platforms and walkways in the fields of municipal engineering and environmental sanitation engineering, as well as ground platforms in large places such as cinemas, visiting platforms and parking lots.

Hot Products

T1 Welded Fixing Without Nosing Stair Tread For Steel Ladder 60mm Bearing Bars Pitch T1 type 60mm ...
T1 Welded Fixing Without Nosing Stair Tread For Steel Ladder 40mm Bearing Bars Pitch Introduction to ...
T3 Stainless Steel Ladder Step Plate For Indoor Use In Chemical Plant workshop Product introduction ...
Factory Direct Sales Antiskid Serrated Corrosion Resistant Steel Grate Stair Treads The address of ...
Factory Direct Sales T1 Steel Grate Stair Treads 30mm Bearing Bar Pitch Main performance of steel ...
Customized Silver White T1-T4 Steel Grate Stair Treads Bearing Bar Pitch Main performance of steel ...