T3 Welded Fixing Without Nosing Stair Tread For Steel Ladder
40mm Bearing Bars Pitch
The introduction of bearing bars at 40mm pitch steel ladder stair
tread
T3 type steel ladder step steel grating is welded by bearing flat
steel and cross bar, and then wrapped and welded with pattern front
guard plate on one side. This type of steel ladder step steel
grating is fixed by welding, which is suitable for permanent non
removable steel ladder and is mostly used for equipment surrounding
platforms.
T3 type 40mm flat steel distance steel ladder step grid welding
method
The welding method is to weld the first flat steel at each corner
of the steel grating, with the weld length of no less than 20mm and
the height of no less than 3mm.
The Attribute table of T3 Without Nosing Bolted Fixing Stair Tread
For Steel Ladder Bearing Bars At 40mm Pitch
Name | T3 type flat steel 40mm spacing specification steel ladder step
plate grating |
Color | silver white |
Material | carbon steel q235 and zinc |
Surface | hot galvanized |
Cross bar spacing (mm) | 10 |
Flat steel section (mm * mm) | 25*3,25*5,32*5,40*5 |
Maximum length of step (mm) | 450,750,1200,1500 |
Spacing of flat steel (mm) | 40 |
Tread plate width (mm) | 115,155,195,235,275,315 |
Performance | bearing, anti-skid, anti-corrosion and convenient installation |
Origin | Anping, Hebei,China |
Transportation | Shipping |
standard | iso9001 |
Performance of T3 flat steel 40mm spacing steel ladder step plate
grating
This kind of step board is the most widely used variety in the
industrial field. In the series of steel grating, it has the
strongest resistance to surface impact, excellent compression and
bending resistance, fixed welding method, convenient installation,
hot galvanizing treatment, good corrosion resistance, light
structure, ventilation and light transmission, no accumulation of
rain and snow, free from maintenance, and can adapt to the outdoor
environment.
Where is the steel ladder step plate grating with 40mm spacing
specification of T3 flat steel applied?
The step grid is mainly used in the steel ladders of steel
structure plants in chemical plants, polysilicon projects,
petroleum, power plants, sewage plants, etc., to adapt to the harsh
outdoor environment of the plant or the scene with vibration and
impact.
Instructions for customization of T3 flat steel 40mm spacing
specification steel ladder step plate
You need to transmit the design drawings to us. If you have special
requirements, please note to us. We will quote for you according to
your personalized customization needs and quantity. The payment
method is phased payment.