The mechanical hand feeding design,continuously feeding by the two
clamps, can avoid feeding slipping and improve feeding precision.
|
[China]
Trade Verify
Address: No. 12, Jingshun Road, Yixingbu, Tianjin, China
Contact name:Angela Xu
Tianjin Ejon Flying Science And Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
SPECIFICATIONS | ||||||
Feeding system | Double ball-screw alternate feeding device | |||||
Slotting System | Plane cutter and alloy milling cutter system | |||||
Bending System | Double blade alternate bending system | |||||
Suitable Material | Stainless steel, Galvanized steel, Aluminum plate, Aluminium
profile | |||||
Material Height | Stainless steel、Galvanized steel、Aluminum plate:20~130mm/ Aluminum profile:20-100mm | |||||
Material Thickness | 0.4-1.2mm | |||||
Control System | 4 axis servo control system | |||||
Min. Bending Angle | R6 | |||||
File Format | Dxf.Plt.Ai | |||||
Power | AC220V、50Hz、3.0Kw | |||||
Total Weight | 500Kg | |||||
1) Extra long bending span, effectively avoiding affecting the forming angle during processsing.
2) The 4-axis servo control system of feeding, slotting, slotting height and bending has improved processing efficiency and stability.
3) The main hardware of the machine is monobloc casting (bending mechanism, clamping mechanism and encoder, etc.) which ensure the strong stability.
4) 4 sets of Delta servo control system,SMC pneumatic component,chrome-faced,computer and air pump.
The mechanical hand feeding design,continuously feeding by the two
clamps, can avoid feeding slipping and improve feeding precision.
The double ball screw of feeding design ensure the feeding speed
and precision as well as stability
Double-cutter slotting, using plane cutter for Galvanized sheet and
Stainless steel,using milling cutter for Aluminum plate and
Aluminum profiles.
The encoder module is the key component of the the relation
equipment precision , and the precision casting is used to
ensure the performance of the high precision encoder.
To use the device, you need to install the control card in your
computer and then connect to the bending machine and install the
software.Computer configuration : XP system or window7 32-bit system, and requires a PCI card slot to
install the control card.
The use of equipment should be equipped with air compressor, we suggest that the selection of more than 4kw, the gas flow is 0.6m³/Min.
The software of bending machine is self-developed. Import file
format supports .Dxf.Plt .AI We recommend using Coredraw or adobe illustrator to complete the file after the export file to.Dxf.Plt.Ai format.
Then open the operating software, select the document.
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
* Training how to instal the machine, training how to use the machine.
* Engineers available to service machinery overseas.
