Active Member
|
[China]
Address: 11F, BUILDING 1 KINGBOARD PLAZA, NO. 505 GUANGMING ROAD, HUAQIAO, KUNSHAN, JIANGSU, CHINA
Contact name:HAN
Kunshan Brave Tech Co.,Ltd. |
|
|
C Profile Track Light Keel Forming Machine Aluminium Ceiling Tile Machine C Channel Roll Forming Machine
(1). Brief Introduction
The High precision light steel stud profiles metal frame roll forming machine have beautiful appearance and bright color.
They are widely used in gardens, factories, resorts, hotels, exhibition halls, vacationlands,
ancient architectures and modern villas.
| Suitable material | PPGI/Aluminium sheet/galvanized sheet/various sheet plates |
| Thickness of coil sheet | 0.2-0.6mm |
| Usage | Light steel keel |
| Effective width | 75mm |
| Material of main frame | 600H steel |
| Diameter of Soild shaft | 70mm, high grade 45# steel |
| Roller | High grade 45# steel, quenched and tempered treatment, hard chrome plated 0.05-0.07mm |
| Thickness of middle plate | 16mm, 45# steel plate |
| Forming station | 14rows |
| Drive type | By chain(1.0 inch), link bearing model 6210 |
| Power of main motor | 5.5 kw, Lichao, Shanghai, with reducer |
| Sidewall connection bar | 25mm, zinc plated |
| Forming speed | About 12-18m/min |
| Hydraulic pump station | 4.0 kw, 40# hydraulic oil |
| PLC | DELTA(TAIWAN)/Mitsubishi |
| Material of razor blades | Cr 12, quenching 58-62℃ |
| Switch | CHNT |
| Frequency changer | SAJ |
(3).Technical Detail
A Sheet Specifications
| 1 | Coil Type | PPGI GI |
| 2 | Width | 500mm |
| 3 | Thickness | 0.3-0.8mm |
| 4 | Yield stress | Q235 |
| 5 | Effective | 235mm |
B Components Details
| Roller Material | High grade 45# steel. Hard chrome plating, 0.05mm. |
| Main Frame | 350# steel. More stable and no shaking. |
| Middle Plate | 16mm. We use thicker plates to ensure stability of our products. |
| Forming Steps | 15, according to the drawing. |
| Shaft Material | Φ70 mm, high grade 45# steel. |
Treating process: tempering- finish turning, high rigidity, hard to deform. | |
Cutting Blade Material | Cr12, hardness HRC60-62. |
| Treating process: heat treatment- plane abrasion- wire electrode cutting. |
C. Electric Components
| Suitable Power | 380V, 50 Hz, 3 phase or according to your need. |
| Screen | 7 inch touch screen, easy to operate. |
| PLC | Delta DVP 14ES |
well-adapted to various conditions, such as moisture, electromagnetic disturbance. | |
| Frequency Converter | Delta VFD-M. It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm). |
Length Measurement Device | Omron, made in Japan. |
| It features with high accuracy and stability. |
