|
[China]
Trade Verify
Address: Binzhou, Shandong, China | code:256200
Contact name:Zhang tao
Shandong Longkuang Metal Products Co., Ltd. |
|
Verified Suppliers
|
|
|
Strengthening Production Process Steel Wire Cutter Pills Size 0.8mm 1.0mm 1.5mm 2.0mm 2.5mm
Coating compatibility: Steel cut wire shot can be engineered with coatings or surface treatments that enhance its compatibility with specific coatings or surface finishes. These coatings can promote better adhesion, prevent contamination, or improve the bonding properties between the shot-blasted surface and subsequent coatings, resulting in improved coating performance and durability.
Reduced dust generation: Innovative manufacturing techniques and surface treatments can be employed to minimize dust generation during the shot blasting process. This not only improves air quality and safety but also reduces the need for frequent cleaning of the work area, increasing operational efficiency.
Advanced recycling technologies: Manufacturers can implement advanced recycling technologies for steel cut wire shot, such as magnetic separation or automated sorting systems. These technologies allow for more efficient and effective recovery of used shot, reducing waste and ensuring a higher percentage of reusable shot for cost savings and environmental benefits.
Surface activation for enhanced bonding: Steel cut wire shot can undergo surface activation treatments that improve its ability to create a strong bond with subsequent coatings or surface treatments. This surface activation enhances the adhesion properties of the treated surface, resulting in improved coating performance and longevity.
Customized packaging and dispensing solutions: Steel cut wire shot can be packaged and delivered in customized packaging formats that optimize convenience, efficiency, and usability. This can include solutions such as bulk containers, pre-measured packs, or dispensing systems that minimize waste, simplify handling, and ensure accurate shot quantities for each application.
Tailored surface roughness ranges: Manufacturers can offer steel cut wire shot with tailored surface roughness ranges to meet specific requirements. This allows for precise control over the desired surface finish, ensuring optimal results for various applications, such as achieving specific roughness parameters for improved adhesion or aesthetics.
Low dust cling properties: Steel cut wire shot can be designed with low dust cling properties, reducing the tendency for dust or debris to cling to the shot's surface. This improves the shot's cleaning efficiency, reduces the frequency of equipment cleaning, and minimizes the risk of contaminants being reintroduced onto the workpiece during the shot blasting process.
| Attribute | Value |
|---|---|
| Name | Steel Wire Cut Pills |
| Chemical Composition | C 0.45～0.75% Mn 0.40～1.20% Si 0.10～0.30% S<0.04% P<0.04% |
| Microstructure | Longitudinal (uniformly Deformed Pearlite) Horizontal (uniformly Deformed Pearlite) |
| Average Hardness | 1.0mm:51～53 HRC(525～561HV) 1.5mm:41～45 HRC(388～436HV) |
| Application | Shot Blasting, Shot Blasting, Die Casting Cleaning, Casting Shot Blasting, Etc. |
| Hardness Deviation | The Maximum Deviation Range Is ±1.0HRC Or ±40HV |
| Production Process | Drawing, Cutting, Strengthening, Etc. |
| Tensile Strength | 1.0mm:1750～2150 Mpa 1.5mm:1250～1450 Mpa |
| Minimum Density | 7.8g/cm3 |
| Size | 0.8mm 1.0mm 1.5mm 2.0mm 2.5mm |
| Key Words | Stainless steel pills, Rounded low carbon steel wire shot cutting, Steel Wire Cutter Pills |
Inner packaging: 25kg/bag with inner film bag.
Outer packaging: nylon woven bag, kraft paper bag, carton.
Whole ton packaging: pallet or ton bag.
