Active Member
|
[China]
Address: Room2434,3rd floor,Building 469 Fengjin Road,Fengxian District,Shanghai
Contact name:David
BoYue Industrial (Shanghai)Co., Ltd. |
|
|
Forged ANSI B16.5 Stainless steel rf lap joint collar flange 2'
300# For Industry
Product Description:
Material Grades:
Duplex And Super Duplex:
ASTM A/SA182 F51,F53,F55,F59,F60(W1.4462,1.4410,1.4501,1.4507,ETC)
Nickel Alloy:
ASTM B564 N10276,N04400,N06600,N06601,N06625,N08800,N08020 ,ETC
(W2.4819,2.4360,2.4361,2.4816,2.4851,2.4856,1.4876,1.4958,ETC)
| Porduct Name | weld neck flange, slip on flange, blind flange, tube sheet, threaded flange, socket weld flange, plate flange, spectacle blind, LWN, Orifice flange, anchor flange. (En1092-1 PN10 Pn16 DN900 DN750 Plate Steel Stainless Steel Flange) |
| OD | 15mm-6000mm |
| Pressure | 150#-2500#,PN0.6-PN400,5K-40K,API 2000-15000 |
| Standard | ANSI B16.5,EN1092-1, SABA1123, JIS B2220, DIN, GOST,UNI,AS2129, API 6A, etc. |
| Wall thickness | SCH5S, SCH10S, SCH10, SCH40S,STD, XS, XXS, SCH20,SCH30,SCH40, SCH60, SCH80, SCH160, XXS and etc. |
| Material | Stainless steel: A182F304/304L, A182 F316/316L, A182F321, A182F310S, A182F347H,A182F316Ti, A403 WP317, 904L, 1.4301,1.4307,1.4401,1.4571,1.4541, 254Mo and etc. Carbon steel: A105, A350LF2, Q235, St37, St45.8, A42CP, E24 , A515 Gr60, A515 Gr 70 |
Duplex stainless steel: UNS31803, SAF2205, UNS32205, UNS31500, UNS32750 , UNS32760, 1.4462,1.4410,1.4501 and etc. Pipeline steel: A694 F42, A694F52, A694 F60, A694 F65, A694 F70, A694 F80 etc. | |
Nickel alloy: inconel600, inconel625, inconel690, incoloy800, incoloy 825, incoloy 800H, C22, C-276, Monel400, Alloy20 etc. Cr-Mo alloy: A182F11, A182F5, A182F22, A182F91, A182F9, 16mo3 etc. | |
| Application | Petrochemical industy;avation and aerospace industry;pharmaceutical industry; gas exhaust;power plant;ship buliding;water treament,etc. |
| Advantages | ready stock,faster delivery time;available in all sizes,customized;high quality |
| Product :Lap Joint/Loose Flange |
American Standard: |
Duplex And Super Duplex: |
Nickel Alloy: |
Other Alloys: |
Lap Joint Pipe Flanges Definition:
The lap joint pipe flange is that set the flange on the pipe end by
using steel ring and flanging. The flange
could be moved at the end of the pipe. Steel ring or flanging is
the sealing surface, with flange to press th
em together. Because of the steel ring or the flanging block, the
lap joint flange will not contact with the
liquid. So it is applicable to corrosion resistant pipelines.
Material of a Lap Joing Flange:
The stub end and lap joint flange is separated, so they could be
different material grade,it is very common
that a carbon steel lap joint flange work together with a stainless
steel stub end. The butt weld end of the
stub-end is like the neck of the weld neck flange, the
diameter and thickness is according to the pipe for
connection.So the material of backing flange in a lap joing flange
could be carbon steel commonly for low
cost,the material of stub end could be chosen as per the pipe
material and fuild situation.
Lap joint flanges use a stub end that is welded to the pipe.
A ring flange fits loosely around the stub end,
permitting easy flange alignment of the bolt holes. lap joint
flange is also called Van Stone or Stub Flange.
The stub ends are available in three styles (Types A, B, and C) and
two lengths (Short and Long).
Lap Joint flange
Lap Joint Flanges have all the same common dimensions as any other
flange named on this page however
it does not have a raised face, they used in conjunction with a
"Lap Joint Stub End".
These flanges are nearly identical to a Slip On flange with the
exception of a radius at the intersection of
the flange face and the bore to accommodate the flanged portion of
the Stub End.
Their pressure-holding ability is little, if any, it better
than that of Slip On flanges and the fatigue life for the
assembly is only one tenth that of Welding Neck flanges.
They may be used at all pressures and are available in a full size
range.These flanges slip over the all pipe
and they are not welded or otherwise fastened to it. Bolting
pressure itransmitted to the gasket by the pre-
ssure of the flange against the back of the pipe lap (Stub End).
Lap Joint flanges have certain special advantages:
1.Freedom to swivel around the pipe facilitates the lining up of
opposing flange bolt holes.
2.Lack of contact with the fluid in the pipe often permits the use
of inexpensive carbon steel flanges with
corrosion resistant pipe.
3.In systems which erode or corrode quickly, the flanges may be
salvaged for re-use.
DETAILS OF LAP JOINT FLANGE
1.Lap Joint flange 2. Stub End
3. Butt weld 4. Pipe or Fitting
Product Attribute
| Place of Origin | China | Brand Name | BOYUE |
| Standard | ANSI B16.5 | Type | Lap Joint/Loose Flange |
| ModelNumber | ASTM A/SA182 F51,F53 | Thickness | #300 #900 |
| Packing | Ply-Wood Cases | Payment | 30%TT+70% Balance |
Supply Ability:10000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally plywooden case or following customer's
requirement.
Port:Shanghai/Tianjin
Commerce Clause
| Minimum Order Quantity: | 1pcs |
| Price: | Depending on quantity |
| Payment Terms: | T/T or Western Union or LC |
| Supply Ability: | 10000pcs per month |
| Delivery Time: | 7-100 days depending on quantity |
| Packaging Details: | Generally plywooden case or following customer's requirement. |
Why Choose Us
1. One-Stop Service,One Single Source.
2. No MOQ.
3. Best quality,competitive price
4. Fast Reply.
5. On-Time Delivery
6. Professional sales and technical team .
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing
of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce
based on your drawings.
Q3: Will my drawing be safe after you get it?
A3: Yes, we will not release your design to third party unless with
your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to
ensure quality standard, but it’s charged according to your drawing
