Active Member
|
[China]
Address: Room2434,3rd floor,Building 469 Fengjin Road,Fengxian District,Shanghai
Contact name:David
BoYue Industrial (Shanghai)Co., Ltd. |
|
|
API 5CT CASTING AND TUBING ERW and Seamless SPEC for Oil, Gas,
Petroleum OD1/2'-48'
BOYUE is a well known worldwide exporter of A691 Grade 1-1/4CR, 2-1/4CR,
5CR, 9CR, 91 Alloy Steel EFW Pipe, Prosaic Steel and Alloys is
committed to provide each and every customer with the highest
standard of customer service. We deals inA691 Grade 1-1/4CR,
2-1/4CR, 5CR, 9CR, 91 Alloy Steel EFW Pipe in India & Overseas,
offering a wide range of A691 Grade 1-1/4CR, 2-1/4CR, 5CR, 9CR, 91
Alloy Steel EFW Pipe
Quality Standard:
SY/T 6194 :Petroleum and natural gas industries - Steel pipes for
use as casing or tubing for wells
API 5CT :CASING AND TUBING
BS EN ISO 11960 :Petroleum and natural gas industries - Steel pipes
for use as casing or tubing for wells
NF M87-207 :Petroleum and natural gas industries - Steel pipes for
use as casing or tubing for wells
JIS G3439 :SEAMLESS STEEL OIL WELL CASING, TUBING AND DRILL PIPE
IS:4270:Steel tubes for well spainend casing pipes
Steel Grade:H-40, J-55, K-55, M-65,N-80, C-75, L-80, C-90, T-95,
P-110,Q-125
Process: ERW and Seamless
Standards:
API Specification 5CT latest edition at time of manufacture (PSL-1,
PSL-2, PSL, 3)
ISO 11960:2004, Petroleum and natural gas industries-Steel pipes
for use as casing or tubing for wells
Sizes:
Outside Diameter: 1.660" - 30"
Grades:
H40, J55, K55, N80,N80Q, L80, C90, C95, T95, P110, Q125,SS95,SS110,
9%CR, 13%CR
Connections:
And almost any premium & gas tight connection
Length:
Range 1, Range 2 & Range 3:
Applicable Tests:
See our Standard Inspection Scope
Protection:
External bare and uncoated or externally coated with black/
transparent anti rust Mill varnish
Plastic or Metal Pin and Box Protectors.
Internal plastic coating or sleeves.
Mill Test Certificates:
Issued in accordance with API Specification 5CT Eighth Edition
Additional Third Party Inspection can also be performed on request.
Application:Tube for conveying gas, water, and oil in both and natural gas
industries etc.
Casing:Casing is a large diameter pipe that serves as the
structural retainer for the walls of oil and gas
wells, or well bore.It is inserted into a well bore and cemented in
place to protect both subsurface
formations and the wellbore from collapsing and to allow drilling
fluid to circulate and extraction to take
place. Steel Casing Pipes have smooth wall & minimum yield
strength of 35,000 psi.
Tubing: Tubing is pipe used for the transportation of crude oil and
natural gas from an oil or gas layer to
the surface after drilling is complete. It is made to withstand the
pressure generated from the extraction
process. Tubing is manufactured in the same way as casing, except
that an additional process known as
"upsetting" is applied to thicken the pipes.
Quality Standard:
SY/T 6194 :Petroleum and natural gas industries - Steel pipes for
use as casing or tubing for wells
API 5CT :CASING AND TUBING
BS EN ISO 11960 :Petroleum and natural gas industries - Steel pipes
for use as casing or tubing for wells
NF M87-207 :Petroleum and natural gas industries - Steel pipes for
use as casing or tubing for wells
JIS G3439 :SEAMLESS STEEL OIL WELL CASING, TUBING AND DRILL PIPE
IS:4270:Steel tubes for well spainend casing pipes
Steel Grade:H-40, J-55, K-55, M-65,N-80, C-75, L-80, C-90, T-95,
P-110,Q-125
Process: ERW and Seamless
Size:
Outer Diameter:Casing: OD 4 1/2"- 20" (114.3mm-508mm)
Tubing: OD 2 3/8" - 4 1/2" (60.3mm-114.30mm)
Wall Thickness: 0. 205"- 0.635"
Length: R1(4.88mtr-7.62mtr), R2(7.62mtr-10.36mtr), R3(10.36mtr or
longer)
Connection: Casing: LTC, STC, BTC, VAM.Tubing: NUE, EUE.
End: Beveled, Square cut. And pipe protection cap specially for
casing and tubing.
Surface: Corrosion proofing water based paint
Heat treatment: Normalized, Quencher+Temper
Packing: Plastic plugs in both ends, Hexagonal bundles of max.
2,000kg with several steel strips, Two tags
on each bundle, Wrapped in waterproof paper, PVC sleeve, and
sackcloth with several steel strips
Test:
1>.Chemical Component Analysis.
2>.Mechanical Properties (Ultimate tensile strength, Yield
strength, Elongation).
3>.Technical Properties (Flattening Test, Flaring Test, Bending
Test, Hardness Test, Blow Test, Impact Test etc).
4>.Exterior Size Inspection.
5>.Nondestructive Test (Ultrasonic flaw detector, Eddy current
flaw detector), Hydrostatic Test.
Mill Test Certificate: EN 10204/3.1B
Place of Origin | China | Brand Name | BOYUE |
| Standard | ANSI, ISO, ASME, DIN, ASTM | Type | Seamless |
| ModelNumber | Carbon Steel Pipe | Thickness | SCH 5-SCH XXS |
| Packing | Depending on customer | Payment | 30%TT+70% Balance |
Supply Ability:40000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally plywooden case or following customer's
requirement.
Port:Shanghai/Tianjin
Commerce Clause
| Minimum Order Quantity: | 1pcs |
| Price: | Depending on quantity |
| Payment Terms: | T/T or Western Union or LC |
| Supply Ability: | 40000 ton per month |
| Delivery Time: | 10-100 days depending on quantity |
| Packaging Details: | Depending on customer |
Why Choose Us
1.One-Stop Service,One Single Source.
2.No MOQ.
3.Best quality,competitive price
4.Fast Reply.
5.On-Time Delivery
6.Professional sales and technical team .
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing
of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce
based on your drawings.
Q3: Will my drawing be safe after you get it?
A3: Yes, we will not release your design to third party unless with
your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to
ensure quality standard, but it’s charged according to your
drawing.
