Active Member
|
[China]
Address: Room2434,3rd floor,Building 469 Fengjin Road,Fengxian District,Shanghai
Contact name:David
BoYue Industrial (Shanghai)Co., Ltd. |
|
|
Carbon Steel Pipe Corrosion Resistant For Industrial Water Lines API 5L X65 X70 OD1/2'-48'
Industrial Water Lines, Plant Piping
Agriculture and Irrigation
Galvanized Steel Fencings
Road Barriers
Parking Barriers
Temporary Fencings
Steel Gates & Windows
Road Side Railings
Structural and fabrication work
Water Pipelines
Sewerage Systems
Oil Pipe Lines
Oil Refinery Piping, Crude Oil Piping
Product Description:
Standard: API,GB,ASTM,ASME,DIN..
Quality Grade:10#,20#,A106 B, A53B,API 5L B,Q235,Q345,SA179,ST37,ST52,etc.
Dimension: OD:1/2”-24”
WT:2.5-80mm, SCH10~SCH40~XXL
Length: any meter is ok.
Technique: Hot Rolled/Cold Rolled/Cold Drawn
Application:
Carbon seamless steel pipes are widely used in gas,water and oil,
Transportation;constructions; Bridge,highway,windows of model steel
door;
Building materials;fences;heating factories Fluid pipe, conduit
pipe,scaffolding pipe .etc.
Payment Terms:L/C,T/T
Packing and shipment
Packaged in bundles, as per customers requirements, it can also be
packaged as beveled ends,
Typed marking, black painting, plastic caps protection,blue plastic
bags.
For 20 ft container the max length is 5.8 m,For 40 ft container the
max length is 12m,
Other options are available based on customer requests. Please
discuss when placing order
Steel Grade | Mass fraction, % based on heat and product analyses a,g | ||||||
C | Mn | P | S | V | Nb | Ti | |
max b | max b | max | max | max | max | max | |
Seamless Pipe | |||||||
A | 0.22 | 0.9 | 0.3 | 0.3 | – | – | – |
B | 0.28 | 1.2 | 0.3 | 0.3 | c,d | c,d | d |
| 0.28 | 1.3 | 0.3 | 0.3 | d | d | d |
X46 | 0.28 | 1.4 | 0.3 | 0.3 | d | d | d |
X52 | 0.28 | 1.4 | 0.3 | 0.3 | d | d | d |
X56 | 0.28 | 1.4 | 0.3 | 0.3 | d | d | d |
X60 | 0.28 e | 1.40 e | 0.3 | 0.3 | f | f | f |
X65 | 0.28 e | 1.40 e | 0.3 | 0.3 | f | f | f |
X70 | 0.28 e | 1.40 e | 0.3 | 0.3 | f | f | f |
Welded Pipe | |||||||
A | 0.22 | 0.9 | 0.3 | 0.3 | – | – | – |
B | 0.26 | 1.2 | 0.3 | 0.3 | c,d | c,d | d |
X42 | 0.26 | 1.3 | 0.3 | 0.3 | d | d | d |
X46 | 0.26 | 1.4 | 0.3 | 0.3 | d | d | d |
X52 | 0.26 | 1.4 | 0.3 | 0.3 | d | d | d |
X56 | 0.26 | 1.4 | 0.3 | 0.3 | d | d | d |
X60 | 0.26 e | 1.40 e | 0.3 | 0.3 | f | f | f |
X65 | 0.26 e | 1.45 e | 0.3 | 0.3 | f | f | f |
X70 | 0.26e | 1.65 e | 0.3 | 0.3 | f | f | f |
a. Cu ≤ = 0.50% Ni; ≤ 0.50%; Cr ≤ 0.50%; and Mo ≤ 0.15%, b. For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for Mn is permissible, up to a maximum of 1.65% for grades ≥ L245 or B, but ≤ L360 or X52; up to a maximum of 1.75% for grades > L360 or X52, but < L485 or X70; and up to a maximum of 2.00% for grade L485 or X70., c. Unless otherwise agreed NB + V ≤ 0.06%, d. Nb + V + TI ≤ 0.15%, e. Unless otherwise agreed., f. Unless otherwise agreed, NB + V = Ti ≤ 0.15%, g. No deliberate addition of B is permitted and the residual B ≤ 0.001% | |||||||
Chemical Components (%) | ||||||||||||
Grade | C | Mn | P | S | Si | Cr | Mo | V | Nb | N | Al | others |
P1 | 0.10-0.20 | 0.30-0.80 | ≤0.025 | ≤0.025 | 0.10-0.50 | / | 0.44-0.65 | / | / | / | / | / |
P2 | 0.10-0.20 | 0.30-0.61 | ≤0.025 | ≤0.025 | 0.10-0.30 | 0.50-0.81 | 0.45-0.65 | / | / | / | / | / |
P5 | 0.15max | 0.30-0.60 | ≤0.025 | ≤0.025 | 0.50max | 4.0-6.0 | 0.45-0.65 | / | / | / | / | / |
P9 | 0.15 max | 0.30-0.60 | ≤0.025 | ≤0.025 | 0.25-1.0 | 8.0-10.0 | 0.90-1.10 | / | / | / | / | / |
Mechanical Properties | ||||
Grade | Tensile | Yield | Elongation | Hardness |
Strength (Mpa) | Strength (Mpa) | (%) |
| |
P1, P2 | ≥380 | ≥205 | ≥30 | ≤89HRB |
P5 | ≥415 | ≥205 | ≥30 | ≤89HRB |
P9 | ≥585 | ≥415 | ≥20 | ≤25HRC |
Place of Origin | China | Brand Name | BOYUE |
Standard | ANSI, ISO, ASME, DIN, ASTM | Type | Seamless |
ModelNumber | Carbon Steel Pipe | Thickness | SCH 5-SCH XXS |
Packing | Depending on customer | Payment | 30%TT+70% Balance |
Minimum Order Quantity: | 1pcs |
Price: | Depending on quantity |
Payment Terms: | T/T or Western Union or LC |
Supply Ability: | 40000 ton per month |
Delivery Time: | 10-100 days depending on quantity |
Packaging Details: | Depending on customer |
Supply Ability:40000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally plywooden case or following customer's requirement.
Port:Shanghai/Tianjin
Commerce Clause
Why Choose Us
1. One-Stop Service,One Single Source.
2. No MOQ.
3. Best quality,competitive price
4. Fast Reply.
5. On-Time Delivery
6. Professional sales and technical team .
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce based on your drawings.
Q3: Will my drawing be safe after you get it?
A3: Yes, we will not release your design to third party unless with your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to ensure quality standard, but it’s charged according to your drawing.
