Henan Mine Crane Co.,Ltd. |
|
Double welding box girder, beam deflection with DIN/FEM standard
Steel Material: Chinese standard steel Q235B,Q345B
Manual brush painting,One alkyd iron red primer painting, two alkyd
orange enamel finish painting
Epoxy zinc-rich primer painting for one bottoms and two sides of
120μm thick, to achieve a long lifespan, beautiful appearance and
good luster.
The girder and end beam are connected together by high strength
bolts to ensure the structure strength and precision of the whole
machine.
The end beams are equipped with flat wheel or double rim wheels,
anti-friction bearings, buffer blocks and derailment preventing
plate
Cabin Control High quality QB Model double girders Anti explosion
or exproof eot crane
Product descriptions of QB Model double girders Anti explosion or exproof eot crane:
QB Explosion proof double girder girder electric overhead traveling
crane, the lifting unit is a hook, It is usually to be used to
explosive environment. It mainly consists of lifting trolley,bridge
frame,long traveling unit,hook and wire rope,magnet system, cabin
and electric control system,etc.
The explosion proof has special design on crane wheel,hook and
wirerope to avoid spark happening,.
It has reasonable structure,light dead weight,low noise,easy
operation and maintenance,low maintenance frequency and
cost,superior performance,long service life.
QB Explosion proof double girder girder electric overhead traveling
crane Normal capacity are 5t,10t,16t,16/3.2t,20/5t,32/5t,the span
is 10.5m-31.5m, lifting height 16-20m, working class is A6.
Control model: cabin control.
And ambient temperature normally not more than 45ºC
Technical parameters:
Lifting weight(t) | 5 | 10 | 16 | 20 | |
Span(m) | 10.5~31.5 | ||||
Max Lifting height(m) | 6~30 | ||||
Working class | A6,A7 | ||||
Speed(m/min) | Main Hoisting | 12.9,15.66 | 10.4,15.3 | 10.4,13.3 | 8.6,9.8 |
Speed(m/min) | Trolley Cross Traveling | 43.8,44.6,42.4 | |||
Speed(m/min) | Crane Long Traveling | 70,80 | |||
Motor Type | Heavy Duty Slip ring Motor | ||||
Motor (Kw) | Main Hoisting | 26,30 | 34,45 | 42,55 | 63,90 |
Trolley Cross Traveling | 2.5,4,6.3 | ||||
Crane Long Traveling | 2*4,2*5.5,2*7.5,2*8.5,2*11 | ||||
Control mode | Pendent line control,Remote control,Cabin control | ||||
Recommended Rail model | 38kgs/m,43kgs/m,QU70 | ||||
Power source | 3Ph A.C 50Hz 380V |
Product Photo:
Detailed drawing
Mechanical parts of QB Model double girders Anti explosion or exproof eot crane:
Double welding box girder, beam deflection with DIN/FEM standard
Steel Material: Chinese standard steel Q235B,Q345B
Manual brush painting,One alkyd iron red primer painting, two alkyd
orange enamel finish painting
Epoxy zinc-rich primer painting for one bottoms and two sides of
120μm thick, to achieve a long lifespan, beautiful appearance and
good luster.
The girder and end beam are connected together by high strength
bolts to ensure the structure strength and precision of the whole
machine.
The end beams are equipped with flat wheel or double rim wheels,
anti-friction bearings, buffer blocks and derailment preventing
plate
Safe system
Weight overload protection device
Emergency stop system
Over current Protection, Short-circuit Protection
Phase sequence protection
Zero position protection, No-Voltage protection, convenient and
simple operation.
Protective earth conductor is fitted as standard
Voltage lower protection system
Current overload protection system
High protection level IP44,IP54,IP55
Long and cross travel limit switch
Anti-falling protection of trolley and crane prevents from
accidental falling
High quality long time bearing polyurethane materials buffer fixed
at the end of trolley travelling and crane travelling to prevent
over traveling
Safety hook latch used for avoiding the lifted material out off
from the hook
Audible and visual alarm device to inform the person stay near by
the travelling crane
Rain Cover for lifting mechanism of outdoor cranes, electric
cabinet and driving mechanism