Home Companies Henan Mine Crane Co.,Ltd.

40 Ton Double Girder Foundry Crane Cabin Control EOT Charging Crane

Active Member

Contact Us

[China]

Address: No. 86, jingsan Road, Jinshui District, Zhengzhou,China

Contact name:John Jiao

Henan Mine Crane Co.,Ltd.

40 Ton Double Girder Foundry Crane Cabin Control EOT Charging Crane

Country/Region	china
City & Province	zhengzhou henan

Product Details

40 Ton Double girder cabin control Electric overhead traveling Charging Crane

Product Introduction:
QDY Double girder cabin control Electric overhead traveling charging crane is mainly used at the place where the molten metal is lifted, it is the main lifting and transportation equipment in the smelting workshop of the steel plant, and is used to lift and transfer and pour molten iron in the smelting process, the thermal—protective coating is added at the bottom of the main girder.

QDY Double girder cabin control Electric overhead traveling charging crane mainly consists of bridge frame, long traveling unit, hook and wirerope and lifting trolley, cable,cabin and electric control system,etc.

It has reasonable structure, robust performance, smooth running, soft starting, low noise, low cost maintenance,long service life.
Normal capacity are 5t,10t,16t,16/3.2t,20/5t,32/5t,50/10t,74/20t,100/32t,125/32t,140/40t,160/50t,etc.
the span is 10.5~31.5m, lifting height 16-20m, working class is A7 or A8.
Control model: cabin control.
Ambient temperature normally up to 60ºC

The QDY Double girder cabin control Electric overhead traveling charging crane transports ladles filled with molten steel to the basic oxygen furnace (BOF), or molten steel from the BOF and electric arc furnace to the continuous casting machine. It can also be used for teeming and casting.

Since Double girder cabin control Electric overhead traveling charging crane is used to transport molten steel, thus safety and reliability come first with this crane.

Main features:

1, QDY Double girder cabin control Electric overhead traveling charging crane has very special safe design,it uses two pcs of wire rope system for the main hook, the device is called Balance Arm, any each wire rope is damaged or broken,the other wirerope will safely hold the ladle in the air and wont let it fall down,then to avoid accident.
2, Anti high temperature design, there is heat proof layer on bottom of main girder.
3, Main hook and Aux.hook all have two sets of brake,more safety.
4, Safety monitor is provided to monitor each motion,all data, i.e current,moving speed,are displayed in the cabin,operator can see it clearly.
5, In addition, Safe hydraulic brake is installed onto the flange of the wirerope drum, one more layer of safety guarantee.
6, Motor is with high protection class IP54,IP55, with overspeed switch,overheat protection,fan cooling,motor encoder is optional.
7, Emergency stop system
8, Over current Protection, Short-circuit Protection
9, Phase sequence protection.
10, Zero position protection.
11, Voltage loss protection.

Technical Parameters of Double girder cabin control Electric overhead traveling charging crane :

Lifting weight(t)		5	10		16/3.2	20/5	32/5	50/10	74/20
Span(m)		10.5~31.5
Max Lifting height(m)		16	16	Main hook	16	12	16	12	22
Max Lifting height(m)		16	16	Aux.hook	18	14	18	16	24
Working class		A7
Speed (m/min)	Hoisting	15.5	10.4	Main hook	10.7	9.8	7.8	7.8	6.1
	Hoisting	15.5	10.4	Aux.hook	14.6	15.5	15.5	10.4	9.7
	Traveling of crab	37.2	43.8		44.6	44.6	42.4		33.8
	Traveling of trolley	92.7	92. 7		76	76	89	75	67.3
Motor (type/kw)	Hoisting	15	22	Main hook	37	45	55	75	90
	Hoisting	15	22	Aux.hook	11	15	15	22	37
	Traveling of crab	1.5	2.2		3.7	3.7	7.5	11	15
	Traveling of crane	25.5 27.5	25.5 27.5		27.5,211	27.5, 211	2*11	211, 215	2*22
Steel track	trolley	18kg/m		24kg/m			43kg/m
Steel track	crane	43kg/m		43kg/m or QU70			QU70	QU80	QU100
Power source		3Ph A.C 50Hz 380V