|
[China]
Trade Verify
Address: No.4 Building , No.388, Kongjiang Road,Yangpu District,200093,Shanghai,China
Contact name:Emily
Shanghai Wind Automation Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
Stator Armature Stack Powder Coating Machine 3M Scotchcast Electrical Resin WIND-HDP
WIND-HDP Stator Powder Coating Machine
This powder coating machine is capable of stator lamination insulation treatment. It should be used together with a heating oven. After stator heated, load it into machine fixture, press start button, safety door closes, then machine will automatically dip stator into the fluidised powder bed. After powder coating, machine will automatically lift the stator, rotate it 180 degree to evenly coating powder. There are also a separate area for removing excess powder with an air gun so that powder can be recycled and re-used.
Specification
| Ambient temperature | -20℃~40℃ |
| Relative humidity | Less than 80% |
| Air supply | 0.6MPa |
| Power | 3KW |
| Power supply | AC 380V ± 10%, 50Hz / 60Hz |
| Dimensions | 1200(L)X1280(W)X2060(H) mm |
Features
1. Stator should be pre-heated.
2. Manual loading and unloading
3. Dipping time adjustable on touch screen
4. Safety door to keep powder contained
5. With powder recycling function and fixture rotation function
6. Stator pre-heating temperature is as per customer’s requirement, our recommendation is 220-230 degree.
Operation step
1. Power on machine
2. Pre-heat stators
3. Select related stator parameter on touch screen
4. Load heated stator
5. Press auto start button
6. Machine will automatically do powder coating
7. Unload stator
8. Remove extra powder by air gun
