0.22mm Wire 0.4mm Aperture Stainless Steel Woven Wire Mesh SUS202 304 310S 316 316L 430

40 Mesh 0.22mm Wire 0.4mm Aperture SUS202 304 310S 316 316L 430 Stainless Steel Wire Mesh

• Material: 302, 304, 304L, 316, 316L, etc.
  Wire diameter: 0.02-2.03mm.
  Mesh size: 1*30m, 1.2*30m, 1.5*30m, 1.6*30m, 2*30m, etc.
  Woven type: plain, twill, ducth.
  
  Material :
  SS 430: Non Nickel and have magnetic;
  SUS 202: non-magnetic, low anti-corrosion resistence;
  SUS 304/304L: low-magnetic, good anti-corrosion resistence;
  SUS 316/316L: low-magnetic, better anti-corrosion resistence;
  SUS 310S: anti-oxidization,anti-corrosive and high temperature resistence
  
  Mesh count :
  SUS 202/310s sutiable for mesh count from 1 to 100( plain weave);
  SUS 304/304L suitable for mesh count from 1 to 400(plain/dutch weave);
  SUS 316/316L 430 suitable for mesh count from 1 to 600(plain/twill/dutch weave .
  
  Stainless steel wire mesh is heat-resisting, acid-resisting and corrosion-resisting.
  This kind of wire mesh is widely used in mining, chemicals, food products and others.
  Chemical Composition:

  Grade	C	Si	Mn	P	S	Ni	Cr
  SUS410	≤0.15%	≤1.00%	≤1.00%	≤0.03%	≤0.04%	≤0.60%	11.50~13.50%

  Grade	C	Si	Mn	P	S	Ni	Cr
  SUS430	≤0.12%	≤0.75%	≤1.00%	≤0.040%	≤0.030%	≤0.60%	16.00~18.00%

Weaving Type
TDR, Twilled Reverse Dutch Weave
RPD Reverse Plain Dutch Weave
PRD Plian Reverse Dutch Weave
1,Plain Weave: Each weft wire passes over one and under one warp wire, and each warp wire passes over one and under one weft wire, every weft wire have and warp wire the same diameter.
2,Twill: Wire Cloth in which each warp wire and each shute wire passes successively over and under the two adjacent wires -- in both the warp and shute directions. This over and under movement is shifted one wire with each pass of the shuttle. This pattern permits the weaving of heavier wires in varying meshes.
3,Plain Dutch Weave: Similar interlacing as in Plain Weave, except the warp wires are larger diameter than the shute wires. The lighter shute wires are driven up close thus forming a dense filtering medium. This weave displays a tapered or wedge-shaped opening.
4,Twill Dutch: This filter cloth specification technically combines the Twill Weave and Dutch Weave described above. The larger diameter warp wires successively pass over and under the lighter diameter shute wires. Each pass of the shute wires shifts the over and under movement one wire. The shute wires are driven up close, resulting in a tightly woven filter cloth with tapered or wedge shaped openings.
5,Twill Dutch Double: Very similar to Twill Dutch Weave, but by proper selection of the wire sizes, the shute wires actually overlap each other when driven up tight into position. This permits double the wires per inch in the shute direction. This type of wire cloth is usually considered a Micronic Grade filter cloth.
6,Stranded: In this type of weave, both the warp and shute wires are made up of separate wires, rather than a single wire. This weave is woven in the twill pattern, producing an exceptionally strong and tight mesh.

Proces

sing products
 

 
Concentrating on putting all the efforts into maintaining product standards. We have a full range of production equipment, advanced technology, scientific management and inspection systems so that we can meet the exact requirements of our customers for various of wire mesh products.

Our advantage:
1. OEM products is welcomed.
2. We are direct factory, so any quantity is acceptable.

3. Samples are available if needed.
4. Supply Mill Test Certificate with the products.
5. Our professional technicians could supply you suitable solutions.
 
About us
 

Stainless steel wire mesh packing method,