316L Non-woven Stainless Steel Sintered Metal Fiber Felt For Filtration

316L Non-woven Stainless Steel Sintered Metal Fiber Felt For Filtration

Product Introduction:

Stainless steel sintered metal fiber felt is made of extremely fine steel fiber (micron grade) by sintering in high temperature after special non-woven matching and laying with the pore gradient formed by layers of different pore sizes.The stainless steel sintered fiber felt product can achieve higher rating and larger holding capacity,and larger filter area,and can keep the filtering working continuously.

Structure:

Sintered non-woven fiber felt, the conventional sintered fiber felt and the sintered fiber felt with protective mesh. The second type is added a layer of wire mesh(it may be on a side or on the interlayer ) on the conventional sintered fiber felt, or a layer of wire mesh on each side.Then sintering together forms a high strength sintered fiber felt.

Conventional sintered non-woven fiber felt

Sintered fiber felt with a intercalary support mesh

Sintered fiber felt with a intercalary support mesh

Sintered non-woven fiber felt process

Sintered non-woven fiber felt technical parameters

Sintered non-woven fiber felt feature:

1.High dirt holding capacity, high filtering accuracy, long replacement period;
2.High porosity ,excellent permeability,low pressure drop and large flow.
3.Corrosion and high temperature resistance of acid, alkali and organic solvent,pharmaceutical etc. Resistance , can be used under 480℃ for long time.
4.Easy to be processed and welded.
5.Special specifications are on request.

Application:

Polymer filtration, Petrochemical, High temperature gas dedusting, Oil refining process filtration,Adhesive filtration, Pre-filtration of ultrafilter, Vacuum pump protection filter, Filter membrane support body, Catalyst carrier, Automobile airbag, Aircraft ship and other fuel filtration,Hydraulic system filtration,etc.