304/316 Stainless Steel Tube/Cylindrical Wire Mesh Filter with
Perforated Sheet
Product Introduction:
The Cylindrical Wire Mesh Filter of the water treatment equipment
adopts the punching plate composite sintered net as the filter
material, and the composite sintering of the punching plate is
based on different use conditions and uses to reasonably design the
number of mesh layers and the mesh number. Because it integrates
the pressure-resistant skeleton with the filter mesh, it has a
higher mechanical strength, a more excellent anti-cleaning effect,
and a small loss of pressure drop, in the self-cleaning equipment,
intelligent pressure differential water treatment equipment as well
as food and beverage filtration equipment, it is widely used.
Specification Size:
1 . punching plate material is stainless steel 304 or 316L; |
2. Filtration accuracy 2μm~300μm; |
3. Specially shaped products can be made according to different
requirements. |
How to use:
Stainless steel perforated pipe with wire mesh filter basket can be
reused. It should be removed, cleaned and reinstalled at scheduled
intervals or when it becomes dirty. Replace it with new elements
when the currently one cannot be properly cleaned or is damaged.
Material | 304/316L |
Micron Rate | 1-300um |
Pressure Range | 1.5-3MPa |
Max Temperature | 600℃ |
Feature | Higher mechanical strength, Better backwash efficiency, Lower
pressure drop loss |
Application | Water treatment, Beverage, Food, Metallurgy, Chemical and
Pharmaceutical |
Filter Image:
![](/test/domaindemo-48699.tmp/photo/pl29846053-remark.jpg)