Active Member
|
[China]
Address: No.98 Guangyi New Village, Guangrui Road, Liangxi District, Wuxi
Contact name:Max
Wuxi Benchmark Special Steel Co.,Ltd |
|
|
Hot Rolled Aluminum Alloy Coil Thickness 0.3~6mm For Construction
Product specification
Aluminum alloy is soft and usually alloyed with copper, zinc, magnesium, silicon, manganese and lithium to increase strength. When aluminum alloy is exposed to air, an anti-oxidant coating will be formed instantly to protect products. Aluminum alloy is one of the lightest metals. The application of products ranges from precision technology to daily commodities.
| Alloy | Temper |
| 1xxx: 1050, 1050A, 1060, 1100 | O, F, H12, H14, H16, H18, H22, H24, H26, H28 |
| 3xxx: 3003, 3004, 3104, 3005, 3105 | |
| 5xxx: 5005, 5052, 5754, 5083, 5086, 5182, 5049, 5251, 5454 | O, F, H22, H24, H26, H28, H32, H34, H36, H38 |
Comparison of Alloy Designations for Aluminum Products
| Alloy Series | Chinese Standard | American Standard | European Standard |
| 1xxx Series | 1050 | - | - |
| 1050A | - | EN AW-1050A | |
| 1060 | 1060 | - | |
| 1100 | 1100 | - | |
| 3xxx Series | 3003 | 3003 | EN AW-3003 |
| 3004 | 3004 | EN AW-3004 | |
| 3005 | 3005 | EN AW-3005 | |
| 3105 | 3105 | EN AW-3105 | |
| 5xxx Series | 5005 | 5005 | EN AW-5005 |
| 5052 | 5052 | EN AW-5052 | |
| 5754 | 5754 | EN AW-5754 | |
| 5083 | 5083 | EN AW-5083 | |
| 5086 | 5086 | EN AW-5086 | |
| 5182 | - | EN AW-5182 | |
| 5049 | - | EN AW-5049 | |
| 5251 | - | EN AW-5251 | |
| 5454 | 5454 | EN AW-5454 |
| Temper | Definition |
| F | As fabricated (no mechanical property limits specified) |
| O | Annealed |
| H12 H14 H16 H18 | Strain Hardened, 1/4 Hard Strain Hardened, 1/2 Hard Strain Hardened, 3/4 Hard Strain Hardened, Full Hard |
| H22 H24 H26 H28 | Strain Hardened and Partially Annealed, 1/4 Hard Strain Hardened and Partially Annealed, 1/2 Hard Strain Hardened and Partially Annealed, 3/4 Hard Strain Hardened and Partially Annealed, Full Hard |
| H32 H34 H36 H38 | Strain Hardened and Stabilized, 1/4 Hard Strain Hardened and Stabilized, 1/2 Hard Strain Hardened and Stabilized, 3/4 Hard Strain Hardened and Stabilized, Full Hard |
| Dimension | Range |
| Thickness | 0.2 ~ 6.0 mm |
| Width | 600 ~ 2,600 mm |
* The thickness can be up to 10mm for coil stock (mother coil for
cold rolling).
- Standard Width and Length: 1000mm, 1250mm, 1500mm, 1219mm, 1524mm
- Surface Finish: Mill finish, unless otherwise specified
- Surface Protection:
Without paper interleaved for all aluminum coils
With PE/PVC filming on main side (if specified)
- Coil ID
405mm, 505mm, 605mm
- Minimum Order Quantity
5MT per size, total 20MT for one order
Aluminum strip and coil are common materials with many advantages. Aluminum strip and coil have good forming performance and corrosion resistance, used in the transportation, automobile, shipbuilding, instrument, electrical enclosure, etc.
