JIANGSU MITTEL STEEL INDUSTRIAL LIMITED |
Verified Suppliers
|
|
317L Stainless Steel Plate - UNS S31703 / 1.4438 SS Plates Width 1000mm 1250mm 1500mm 2000mm
Material | 200 300 400 Series stainless steel |
Grade | 201 202 301 303 304 304L 2205 2507 309 309S 310 310S 314 316L 316Ti
317L 321 2205 2507 409 409l 410 410S 420 420J1 420J2 430 441 444
904L |
Standard | AISI ASTM JIS DIN EN BS |
Tech | Cold rolled / Hot rolled |
Thickness | Hot rolled: 3mm-16mm 16-150mm Normal: 3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 As per customer's request: 16-150mm Cold rolled: 0.3-6mm Normal:0.3/0.4/0.5/0.6/0.7/0.8/0.9/1.0/1.2/1.5/2.0/2.5/3.0 As per customer's request: 4.0/5.0/6.0 |
Width&Length | 1000mm-6000mm, or as per customer's request Hot rolled: 1250*3000mm (4.1*10ft) 1500*3000mm (5*10ft) 1250*6000mm (4.1*19.6ft) 1500*6000mm (5*19.6ft) 1800*6000mm (5.9*19.6ft) 2000*6000mm(6.5*19.6ft) Cold rolled: 1000*2000mm (3.2*6.5ft) 1219*2438mm (4*8ft) 1500*3000mm (5*10ft) 1800 available 2000 available |
Place of Origin | Jiangsu China |
Processing Service | Bending, Welding, Recoiling, Punching, Cutting |
Tolerance | ±1% |
Surface Treatment | N0.1,2B,BA,6K, 8K, 12k, N0.4, HL, Mirrored,checkered etc |
Payment | T/T terms, 30% pre-payment, 70% balance see B/L copy LC Western
Union Paypal |
Delivery Time | 5-15 days for ordinary orders (standard orders <=50 ton);
specified orders needs final confirmation as per customer's request |
Dimensions | 317L Stainless Steel Plate |
---|---|
Standard | ASTM A240 / ASME SA240 |
Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm |
Thickness | 4mm-40mm |
Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, |
Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
Surface Finish | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc |
Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc |
STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
SS 317 | 1.4449 | S31700 | SUS 317 | – |
SS 317L | 1.4438 | S31703 | SUS 317L | X2CrNiMo18-15-4 |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
SS 317 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 18 – 20 | 3 – 4 | 11 – 15 | 57.845 min |
SS 317L | 0.035 max | 2.0 max | 1.00 max | 0.045 max | 0.030 max | 18 – 20 | 3 – 4 | 11 – 15 | 57.89 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.9 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |